Akshar Pharma

C.P.A.P: Continuous Positive Airway Pressure.
Boussignac C.P.A.P. is  a device providing continuous positive airway pressure.

Boussignac C.P.A.P. is a respiratory assistance device for patients with spontaneous ventilation allowing maintenance in the airways of a pressure greater than atmospheric pressure during the entire respiratory cycle.
The CPAP mode of ventilation allows:

• to recruit collapsed alveoli and avoid the collapse of pulmonary alveoli,
• to restore a satisfactory level of functional residual capacity,
• to improve gas exchange at the level of the alveolocapillary membrane,
• to decrease pulmonary resistance,
• to decrease the work of breathing,
• to redistribute the alveolar liquid to the interstitial space in case of acute pulmonary oedema.

The CPAP+ set includes:

• 1 Boussignac CPAP which can be connected to a

Additional Information:

• Item Code: 7180
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The exchange-transfusion tray is indicated for alloimmune haemolytic disease of the newborn, hyperbilirubinaemia, severe anemia and polycythaemia. The technique consists of the replacement of most of the patient blood with donor blood. This replacement is made by split and successive volume-to-volume exchanges, in order to remove abnormal blood components and circulating toxins whilst maintaining adequate circulating blood volume.

Contents of the tray:

• 1 four-way stopcock equipped with 1 injection site (for injections of additional medication),
• 1 extension tube for the evacuation of the discarded blood,
• 1 5Fr exchange transfusion catheter (PVC – XRO), 37 cm long, with 2 sides holes and centimetric markings,
• 1 7Fr exchange transfusion catheter (PVC – XRO), 37 cm long, with 2 sides holes and centimetric markings,
• 2 20 ml Luer-lock syringes,
• 1 10 ml Luer-slip syringe,
• 1 16 x 0.5 mm (25G) Luer hypodermic needle,
• 1 graduated plastic container (2000 ml),
• 1 transfusion set, 163 cm long, 18.8 ml dead volume,
• 1 15 cm ruler,
• 3 50 x 50 mm gauze dressings,
• 1 50 x 60 cm fenestrated drape,
• 1 pair of gloves,
• 1 air-venting needle,
• 1 control sheet.

Additional Information:

• Item Code: 4019
• Production Capacity: 5000
• Delivery Time: 7

Gastric aspirator with:

·         a collection trap volume 25ml (total capacity 25ml, with graduations from 2 to 22ml)

·         a cap ensuring a tight seal of the specimen sampling

·         a tube connecting the device to the suction source with funnel connector

·         a tube with female Nutrisafe 2 hub to connect the device to the Nutrisafe 2 feeding tube

ISO standard

ISO 80369-3 - Annex A - THE CONCERN • “Concerns have been raised about the possible risks of delivering accurate doses of medicines in certain clinical practices across high risk subpopulations (e.g. neonatal patients) when using a reversed connection system (female to male). This orientation may introduce inadvertent displacement of fluid …”(1) • “Laboratory testing also shows a mid tolerance E1 [ENFitTM] connector pair in a female to male orientation displaces a mean average of 0.148ml…”(1)

ISO 20695 - Annexes A & K - LOW DOSE TIP SYRINGE (here called "alternative enteral syringe tip") • The ISO committee "has decided to propose [it] for information only as test results lead to contradictory conclusions on dose accuracy with this alternative enteral syringe tip."(2) • "The design of this alternative enteral syringe tip may not ensure that the dose accuracy for enteral syringes is met; specific user information and education should accompany this alternative enteral syringe"(2)

 

 

Additional Information:

• Item Code: 7064
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Multistar 4 + is an antimicrobial XRO polyurethane central venous catheter introduced by Seldinger technique.

The antibacterial activity is ensured by two antibiotics: Rifampicin and Miconazole. The active substances are impregnated inside the bulk polyurethane material in order to reduce catheter-related bloodstream infection risks. Rifampicin and Miconazole are released slowly to ensure a long term efficacy.

It consists of 4 lumens completely separated on the total length of the catheter. Each lumen leads, at the distal tip of the catheter, to a distinct hole. At the proximal end, the lumens of the catheter are connected to extension tubes of different lengths. Each extension tube includes a different coloured hub and is marked “Distal”, “Medial 1”, “Medial 2”, and “Proximal” so as to identify easily the different infusion lines.

Multistar 4 + is available in 3 lengths: 16cm (code 6158.167), 20cm (code 6158.207) and 30cm (code 6158.307).

It is presented in a rigid blister pack containing:

Additional Information:

• Item Code: 5008
• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: 1*1

 

Introducer (PE) for silicone or cardiovascular catheters.
Device placed in the vascular system by the Seldinger technique for introducing cardiovascular or silicone catheters.

Presented in a rigid tubular pack containing:
– 1 introducer needle Ø 1.06 – 1.26 mm long (except for code 1129.04 : Ø 0,9mm – 38mm long)
– 1 straight guidewire Ø 0.97 mm, 39 cm long (except for code 1129.04: 30 cm long)
– 1 dilator + sheath assembly.

 

 

Additional Information:

• Item Code: 7001
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Code 2183.15: for tunnelling catheters with an internal diameter superior or equal to 0.7 mm and up to 1.2 mm.
Code 2183.20: for tunnelling catheters with an internal diameter uperior or equal to 1.3 mm and up to 2.0 mm.

 

 

 

Additional Information:

• Item Code: 7015
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Fully radiopaque catheter with subcutaneous cuff placed at 19 cm (codes 2296.111/190/951) or 26 cm from the distal tip (code 2296.112/260/952). Inserted by percutaneous puncture with a peel-apart Desilet.
The proximal extension tubes have clamps (blue for venous : blood return, red for arterial : blood aspiration). The venous distal opening is separated from the arterial opening by a distance of 2 cm.

Tray presentation (double packaging) containing:

·         1 double-lumen XRO silicone catheter

·         1 Desilet with peel-apart sheath type 1146

·         1 dilator

·         1 tunnelling needle

·         1 10 ml syringe

·         2 injections caps

·         1 scalpel

Additional Information:

• Item Code: 7019
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Additional Information:

• Item Code: 6005
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Code 807.204: Filter-A-line
Neonatal/Paediatric 0.22micrometer I.V. filter
96-hour filter for the removal of inadvertent bacterial contaminants, associated endotoxins, particulates, and air - Male and female Luer-lock fittings - Not for use with lipids, blood or blood products. 
Priming volume: 0.43ml - Flow rate: 5.80ml/min

Code 807.205: Filter-A-line
Neonatal/Paediatric 0.22micrometer I.V. filter with extension line
96-hour filter for the removal of inadvertent bacterial contaminants, associated endotoxins, particulates and air.With microbare tubing and clamp. Male and female Luer-lock fittings. Not for use with lipids, blood or blood products.
Priming volume: 0.59ml - Flow rate: 2.5ml/min – Length: 24cm



Other endotoxin filters are available under the codes 836.201, .202, .204, .205 and .210.
Code 836.201: Ready-set "feed"
Polyurethane double-lumen extension tube
Lumen 1 (15cm long) incorporates a clamp, a 0.22micrometer endotoxin, bacterial, particulate, and air filter, 96 hours with low protein adsorption membrane. This air-eliminating filter is not suitable for blood, blood products or lipids. Priming volume: 0.84ml - Flow rate: 3.5ml/min
The non-return valve on the distal part of the line avoids the occlusion of the filter by reflux of lipidic solutions if the other line is used for that purpose.
Lumen 2 (2cm long) incorporates a closed-system needleless connector (Bionector) and can be used either for intermittent injections of medication or for continuous infusions (e.g. lipidic solutions). Priming volume: 0.24ml - Flow rate: 75ml/min
Total priming volume: 0.90ml

Code 836.202: Ready-set "complete"
Polyurethane extension tube with 2 access ports incorporating non-return valves, clamps and a 0.22micrometer endotoxin, bacterial, particulate, and air filter, 96 hours with low protein adsorption membrane. This air-eliminating filter is not suitable for blood, blood products or lipids. 
Access ports: Priming volume: 0.95ml (x2) - Flow rate: 2.5ml/min (x2)
Length: 20.5cm - Total priming volume: 1.1ml - Flow rate: 2.5ml/min

Additional Information:

• Item Code: 7081
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Pump functions

Automatic syringe size identification

Possibility to adjust sound level

Occlusion detection pressure setting

Optic and sound alarms

Up to 2000 history records

Delivered volume inquiry

Alarms: occlusion / prior administration end / administration end / battery low / out of battery / mains failure / equipment error / flowrate overlimit / administration completion / no operation within 2 minutes

Additional Information:

• Item Code: 6017
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Triple layer extension tube for use with syringe pumps, PCA

Triple layer extension tube for use with syringe pumps, PCA

 

Additional Information:

• Item Code: 5030
• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: 1*1

Spike for bags of intravenous solutions
Code 7218.01: spike with Qimo Female, for aspirating or adding fluids to bags of intravenous solutions. It can also be used with paediatric bags. The spike perforates the infusion bag while Qimo female maintains at all times a closed system allowing to aspirate or add fluids in an aseptic manner.
Code 7218.11: spike with Qimo Female and non-return valve. This spike is designed for aspiration only of fluid from I.V. bags, but no fluid can be added into the bag. It thus avoids the contamination of the I.V. fluid by drugs.
Qimo Female is a multi-purpose, closed, needle-free, small size I.V. connection device. See the corresponding technical file code 7210.02.

 

Additional Information:

• Item Code: 7003
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Bionector is a multi-purpose, closed, needle-free connection device. When Bionector is in place, you can infuse, inject sample and change the I.V. tubing without the I.V. circuit to the atmosphere. Bionector’s membrane automatically opens the fluid pathway only when a male Luer is disconnected, the membrane automatically seals the fluid pathway.

• Bionector preserves constantly a closed system
• 7 days or 360 connections
• Straight fluid pathway
• Neutral displacement of fluid
• Minimal dead space
• Can be used with power injectors (CT-scan). Pressure resistance: 350 psi
• MRI conditional

Additional Information:

• Item Code: 7091
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

PRODUCT NAME: ENDOCRYL INJECTION 

GENERIC NAME: N-BUTYL CYANOACRYLATE 

MANUFACTURE: OCEAN PHARMACEUTICAL

PACKING: 5x0.5ml          

ALTERNATIVE NAME: EPICLOS     

USES: Endocryl 0.5ml Injection is a tissue adhesive solution. When applied over a surgical wound, it hardens immediately and forms a strong bond between the wound edges. This helps stop bleeding and promotes skin closure and healing

WE ARE LEADING SUPPLIERS & DISTRUBUTOR OF

Additional Information:

• Item Code: 8523
• Production Capacity: 5000
• Delivery Time: 7 days

Respiratory assistance device for patients with spontaneous ventilation allowing maintenance in the airways of a pressure greater than atmospheric pressure during the entire respiratory cycle.

Additional Information:

• Item Code: 7177
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Multicath5 expert S is an antimicrobial XRO polyurethane central venous catheter introduced by Seldinger technique.

The ionic silver antimicrobial agent (Agion) is incorportated within the bulk polyurethane material to minimise the risk of catheter-related bloodstream infection risks. Silver ions are released slowly to ensure efficacy during the dwell time of the catheter.

It consists of 5 lumens completely separated on the total length of the catheter. Each lumen leads, at the distal tip of the catheter, to a distinct hole. At the proximal end, the lumens of the catheter are connected to extension tubes of different lengths. Each extension tube includes a different coloured hub and is marked “Distal”, “Medial 1”, “Medial 2”, “Medial 3”, and “Proximal” so as to identify easily the different infusion lines.

Multicath5 expert S is available in 4 lengths: 12.5cm (code 8159.072), 16cm (code 8159.172), 20cm (code 8159.272), or 30cm (code 8159.372).

It is presented in a rigid blister pack containing:

• 1 polyurethane catheter (totally radiopaque) with fixation wings and centimetric graduations from 9cm from distal tip. Smooth distal end,
• 1 safety needle (Seldisafe) 18G, 70mm, to avoid needlestick injuries,
• 1 safety scalpel,
• 1 BLS valve (Blood Less System) on the Seldisafe to limit blood loss and air embolism,
• 1 adaptor for pressure transducer,
• 1 Teflon-coated “J” Nitinol guidewire (particularly kink-resistant) with guide-advancer,
• 1 dilator 10 Fr / Length: 100mm,
• 5 caps,
• 1 5ml syringe,
• 1 supplementary fixation wing for 16, 20, and 30cm catheters,
• 1 ECG cable (Combcard) for 16, 20, and 30cm catheters.

Multicath5 expert S catheters contain photo reactive silver compounds. To protect the catheters from the light, they are delivered with a blind sheath.

Additional Information:

• Item Code: 4012
• Production Capacity: 5000
• Delivery Time: 7
• Packaging Details: 1*1

Double taper connectors in polypropylene (codes 881.11/13/30/31/33/35/47/51/53/57/66/71/77), in polyamide (codes 881.37/44)  and in ABS (code 881.00).

 

Additional Information:

• Item Code: 7133
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Connector to fit a luer syringe or mucus trap to a fibroscope.

Connector to fit a luer syringe or mucus trap to a fibroscope.

 

 

Additional Information:

• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

QimoConnect is an extension tube with Qimo Female and Qimo Male ports for pharmacy drugs dilution and administration, with or without filter.

QimoConnect includes the following components:

– 1 spike,

– 1 Qimo Female needleless connector,

– 1 extension tube with clamp,

– 1 Qimo Male needleless connector which must be attached to the distal end of the extension tube after priming of QimoConnect,

– with or without filter ( see hereunder).

PE-lined tubing with external layer in PVC, intermediate layer in EVA and internal layer in PE (featuring chemical inertia and good chemical inertness to medications).

Codes 7221.01 / 7221.020*: QimoConnect – See the corresponding technical file

Codes 7221.011 / 7221.0110*: QimoConnect filter (0.2 µm)

Codes 7221.012 / 7221.0120*: QimoConnect air filter – See the corresponding technical file

Qimo Female is a multi-purpose, closed, needle-free, connection device. See the corresponding technical file code 7210.02.

Qimo Male is a multi-purpose, closed, needle-free, I.V. connection device which has been designed for the preparation and safe administration of hazardous drugs. See the corresponding technical file code 7210.91.

Codes 7221.01 / 7221.011 / 7221.012: 1 unit in a supple blister.

Code 7221.020 / 7221.0110 / 7221.0120

– 7221.020: 10 units in a blister / 100 units in a box / 600 units in a case

– 7221.0110: 10 units in a blister / 100 units in a box / 600 units in a case

– 7221.0120: 10 units in a blister / 100 units in a box / 600 units in a case

* Codes 7221.020 / 7221.0110 / 7221.0120 are supplied without Qimo Male.

Additional Information:

• Item Code: 7048
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The triple lumen umbilical catheter is used for short term catheterization through the umbilical vein when a multiple access is needed.
It is used for TPN administration, & injection of drugs,  particularly administration of drugs with incompatible features or when one drug needs to be infused continually at a slow rate (ex. inotropes). 
This device allows to reduce the number of peripheral routes needed and so the number of insertions, optimising the infant's comfort.
The secondary functions of the catheter are blood sampling, transfusion and measurement of central venous pressure.
The catheter is made of radiopaque polyurethane (PUR) with markings every centimer. It is equipped with a soft green distal tip to reduce the trauma to the vessel. It has three extension lines with three color-coded hubs to better identify each lumen.

Additional Information:

• Item Code: 5001
• Production Capacity: 5000
• Delivery Time: 7
• Packaging Details: customized

Catheter extension tube (PUR) with Autoflush and clamp.
Diameter 1.5 x 2.5 mm – Priming volume: 0.39 ml – Flow rate 160 ml/min.

Additional Information:

• Item Code: 7053
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

I.V. extension tube in flexible, transparent polyurethane tubing with Vadsite and flat clamp. Octopus with Vadsite is a multi-purpose catheter accessory, a single lumen or multi-lumen I.V. extension tube with needleless connector(s), enabling intermittent injections or continuous infusions of fluids or medications and blood sampling depending on device variant. The variants with anti-reflux valves negate the…

Additional Information:

• Item Code: 5024
• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: 1*1

The Faucher tube is a gastric tube featuring a large diameter inserted through the mouth of the patient in the stomach for emergency suctioning and washout. It is used, for example, in the treatment of acute drug intoxication:

·         Tube made of transparent PVC

·         Open tip with 4 lateral eyes

·         Funnel made of silicone

·         Inner rigid tube  in polypropylene between the funnel and the PVC tube

·         Numerical markings every 5cm from 15 to 75cm

·         Length: 150cm.

The Faucher tube is available in size 27Fr, 30Fr, 33Fr and 36Fr.

 

 

Additional Information:

• Item Code: 7039
• Production Capacity: 5000
• Delivery Time: 7-10 Days
• Packaging Details: 1*1

Transparent polyurethane dressing film for protecting catheter introduction sites. Dermafilm has detachable strips and is self-adhesive, permeable to water vapour and oxygen, hypoallergenic, stretchable and sterile.
Water vapour transmission has been tested according to the EN13726 standard.

• 38.07.05: Dimensions: 7.5x5cm – Adhesive: 5.5x5cm
• 38.08.06: Dimensions: 8.5x6cm – Adhesive: 6x6cm
• 38.09.81: Dimensions: 9.5x6cm – Adhesive: 7.5x6cm – Opening: 10x35mm – U shape
• 38.15.10: Dimensions: 14x10cm – Adhesive: 10x10cm
• 38.15.20: Dimensions: 14x20cm – Adhesive: 10x20cm
• 38.20.15: Dimensions: 20x15cm – Adhesive: 15x15cm
• 38.30.15: Dimensions: 33x15cm – Adhesive: 25x15cm

Additional Information:

• Item Code: 7013
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

QimoPrime is a priming device which can be connected to any product fitted with Qimo Male.

Priming volume: 0.08 ml

Filter: 1,2 µ

 

The 6 key points for safe connections in oncology

Screwless connection • To eliminate over or under-tightening, misthreading • To reduce repetitive strain injuries

Connectable to standard Luer devices • To connect standard Luer slip / Luer lock devices (i.e. : syringes, extension lines, …)

Direct fluid pathway • To make aspiration and injection easier • To allow effective flushing

Material resistant to aggressive solvents • To avoid cracking of medical devices

Barrier against toxic drugs and bacteria • To protect users from chemical contamination and the drugs from bacteriological contamination

Easy disinfection of both ♀ and ♂ hubs • To be able to disconnect and connect again devices if needed

Additional Information:

• Item Code: 7008
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

ArterioSel

 

ArterioSel is a transparent arterial catheter with radiopaque lines introduced using the Seldinger technique and equipped with a puncture needle allowing visualization of the arterial pulsations without blood spillage on needle insertion. The Seldinger technique makes arterial puncture easier particularly in hypotensive patients with a weak peripheral pulse and when arteries are atherosclerosed or narrow.

Additional Information:

• Item Code: 4011
• Production Capacity: 5000
• Delivery Time: 7

Safe adaptor for the connection of a syringe on the funnel of a tube.

Qimo Female allows to connect a syringe secured with Qimo Male.

 

The 6 key points for safe connections in oncology

Screwless connection

 • To eliminate over or under-tightening, misthreading • To reduce repetitive strain injuries

Connectable to standard Luer devices

 • To connect standard Luer slip / Luer lock devices (i.e. : syringes, extension lines, …)

Direct fluid pathway

 • To make aspiration and injection easier

 • To allow effective flushing

Material resistant to aggressive solvents

• To avoid cracking of medical devices

Barrier against toxic drugs and bacteria

 • To protect users from chemical contamination and the drugs from bacteriological contamination

Easy disinfection of both ♀ and ♂ hubs

 • To be able to disconnect and connect again devices if needed

Additional Information:

• Item Code: 7009
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

QimoHarpoon is a device designed for the reconstitution and withdrawal of high-risk medications. With QimoHarpoon, it is possible to dissolve powdered drugs or lyophilisates and to repeatedly withdraw drugs with a syringe from the same vial/bottle.

QimoHarpoon is a needle-free device with a metallic tube (acting as air-intake device) connected to a balloon (50 cc volume). The function of the balloon is to prevent the emission of toxic vapour from the vial and to allow injection and drug aspiration while equalizing pressure in a closed system.

QimoHarpoon is made of:

– a harpoon-shaped spike which perforates the vial/bottle stopper and which cannot be removed from the vial. An opening is located on the harpoon which facilitates injection of the fluid for reconstitution and allows the drawing-up of the final reconstituted solution. From this opening the very last drops of drug can be drawn-up by pulling delicately until the harpoon stops against the cap of the vial.

– a mobile metallic tubing, acting as an air-intake device connected to a balloon filled with sterile air. When this metallic tube is pushed to the bottom of the vial*, the pressure will be equalized and the toxic vapours confined within the balloon.

– a tight protective cover between the base of the spike and the neck of the vial to avoid any contamination with fluids which could leak from the cap of the vial.

– a Qimo Female port, needle-free device, multi-purpose, closed IV connector. Qimo Female can be accessed with any male Luer or Luer-lock syringe or with the Luer bayonet end of Qimo Male.

Qimo Female: see technical file code 7210.02.

Qimo Male: see technical file code 7210.91.

Code 7213.02: QimoHarpoon – Adapted for vials with a maximum height of 9 cm.

Code 7213.01: QimoHarpoon S – Adapted for vials with a maximum height of 6 cm.

*To understand exactly how the device works, please read the instructions for use supplied in the box.

 

Additional Information:

• Item Code: 7005
• Production Capacity: 500
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Designed for optimum performance in terms of efficiency, safety and ease of use.
Allows quick and easy identification of nerves:

• Large LCD screen
• Adjustable impulse generator:

. 0 to 4 mA for an impulse of 300 µs
. 0 to 5 mA for an impulse of 100 µs
. 0 to 6 mA for an impulse of 50 µs

• Adjustable impulse frequency (1, 2 or 4 Hz) and duration (300 µs, 100 µs or 50µs)
• Choice of display units: mA or nC
• “Safety” button immediately cuts off the electric current
• Precision: the double decimal digit display is automatically activated below 0.5 mA, by increments of 0.02 mA
• Plexygon can be used under sterile conditions with a protective hood, supplied separately as a single unit (code 39.00.15)
• Dimensions: Length 200 mm / Width: max. 93 mm – min. 57 mm Height: max. 40 mm – min. 23 mm / Weight: 205 g
• Battery life: over 24 hours continuous operation (battery 9 V – 500 mAh)
• Supplied in a small case for storage and transport
• Conforms to IEC standards 6011 and 601210.

Additional Information:

• Item Code: 7165
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Needle and sleeve are removed and the catheter is connected to a stopcock. A conical adaptor is provided for connecting stopcock to suction or valve.

Easydrain is supplied in a peel-pack containing:

·         1 introducer needle with integral handling sleeve

·         1 radiopaque and transparent polyethylene drain with closed distal end , 30cm long for code 681.06, 40cm long for code 681.082 and 50cm long for codes 681.08 and 681.10. On the distal end of the drain code 681.06 (size 6 Fr) features 3 lateral eyes perforated over 3cm; code 681.082 (size 8 Fr) features 4 lateral eyes perforated over 4cm; code 681.08 (size 8 Fr) and code 681.10 (size 10 Fr) feature 10 lateral eyes perforated over 10cm.

·          

Catheter markings: 1 mark at 10cm and 2 marks at 13cm for code 681.06. All other Easydrain feature 1 mark at 12cm and 2 marks at 22cm.

·         1 x 3-way stopcock with drain connector which is then connected to the proximal end of the drain. The silicone sleeve facilitates the handling of the drain when it is being connected to the drain connector and acts as anti-kinking sleeve once the product is placed

·         1 conical adaptor to connect Easydrain to drainage tubing.

Easydrain is available in size 6 Fr, 8 Fr and 10 Fr.

Additional Information:

• Item Code: 7145
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

·         Insulated needle with a conducting tip

·         Centimetre graduations to visualise the length of needle introduced

·         Transparent needle hub

·         Removable extension tube, length 50 cm. Priming volume: 1 ml

·         60 cm electrical connection cable

·         Available in 2 versions: 17° bevel or 30° bevel.

 

Safe

• Easy identification of our neurafit range with yellow protectors; the colour associated with NRFit

 • Recessed notch indicates the direction of the needle eye plus accurate administration of anaesthetics.

Efficient

 • Crystal clear hub has fast CSF flashback visualisation

• Easy to see CSF through magnified hub

• Spinal introducer with precision matched stylet delivers quick and easy one step removal. Plus instant confirmation of needle tip position.

Additional Information:

• Item Code: 7136
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Huber bevel needle curved to 90° with wings and flexible polyurethane extension tube (length 30cm) with clamp.
Presented in a rigid blister pack.

Autoflush on the lateral port of Hubsite (code 1251) and Perfusafe (code 1250) is a closed needleless device allowing blood sampling, intermittent injections or continuous infusions of fluids or drugs.
Autoflush includes a disinfectable piston (disinfection must be carried out before and after each use) which closes automatically when the infusion line or the syringe is disconnected.
Autoflush provides a 0.03ml positive displacement of I.V. solution when the syringe is disconnected from the lateral port of the Hubsite thus eliminating any retrograde flow of blood into the catheter lumen, preventing catheter occlusion.

CT rated: pressure resistance 350 psi.

 

Additional Information:

• Item Code: 7031
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Qimo Male is a multi-purpose, closed, needle-free, I.V. connection device which has been designed for the preparation and safe administration of hazardous drugs. Qimo Male has a very easily disinfectable membrane (disinfection must be carried out before and after use) which automatically closes when Qimo Female is disconnected.
Qimo Male is a safety adaptor, the proximal end of which must be connected onto the male Luer-lock end of a syringe, an extension tube or an infusion set. At the distal end, the Luer bayonet end can only be connected to devices which feature a Qimo Female end. Note: after the connection of Qimo Male onto a Luer-lock male hub, Qimo Male rotates and cannot be disconnected anymore.
Qimo Male can only be connected to the female Luer bayonet end of Qimo Female, by placing the lugs of Qimo Male into the notches of the bayonet ring of Qimo Female. During the connection, the internal metallic tube of Qimo Female opens both the membranes of Qimo Female and of Qimo Male and the two conduits fit in together. It is then possible to inject, infuse or withdraw samples of drugs. During the disconnection, the membranes automatically close, which ensures the sealing of both devices.
Maximum number of connection: 10 Priming volume: 0.35 ml
Qimo Male is lipid-resistant.
Code 7210.91: Qimo Male – 1 unit in a supple blister. Code 7210.910: Set of 25 Qimo Male : – 25 units in a blister / 100 units in a box / 1 800 units in a case 

Additional Information:

• Item Code: 7006
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The 6 key points for safe connections in oncology

Screwless connection • To eliminate over or under-tightening, misthreading • To reduce repetitive strain injuries

Connectable to standard Luer devices • To connect standard Luer slip / Luer lock devices (i.e. : syringes, extension lines, …)

Direct fluid pathway • To make aspiration and injection easier • To allow effective flushing

Material resistant to aggressive solvents • To avoid cracking of medical devices

Barrier against toxic drugs and bacteria • To protect users from chemical contamination and the drugs from bacteriological contamination

Easy disinfection of both ♀ and ♂ hubs • To be able to disconnect and connect again devices if needed

 

MATERIAL AND METHODS

QIMONO® is made of 2 components: • Qimo Male ♂, safety connector directly attached to the chemotherapy syringe • Qimo Female ♀, multipurpose connector, attached to the perfusion line of the electric syringe pump

Tightness indicators : • Radioactivity; quantitative technique, with 99mTechnetium (99mTc; E= 140KeV, T1/2 = 6h) ; Activity= 200 MBq, V = 5mL ; considered as 100%. • Azorubicine, qualitative technique, as coloured visual indicator.

The Tightness test has been performed from a standardized preparation: a 5mL syringe with 200MBq of 99mTc with a final volume of 5mL azorubicine. QIMONO® (♂and♀) has been connected to the syringe then the solution has been injected in an empty vial. The tightness properties of the connection has been tested by swabbing the external membranes of both Qimo♂ and Qimo♀. The activity for each phase of this preparation has also been measured.

 

 

 

 

 

 

 

 

 

 

 

Additional Information:

• Item Code: 7026
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Seldipur Smartmidline is a single lumen peripheral catheter in Polyurethane for short to mid term peripheral venous access (up to 29 days). Compatible with pressure injection.This catheter is inserted by Seldinger technique.

Seldipur Smartmidline is supplied in a peel-pouch containing:

·         1 Smartmidline polyurethane catheter with integrated extension line and rounded tip

·         1 echogenic puncture needle 21G – 4.5cm

·         1 straight stainless steel guidewire, except for codes128.12062 and 128.12082: nitinol “J” guidewire, 0.018’’(0.46mm)

·         1 green sticker “midline peripheral // max xml/s, max. xxx psi (xx bar)”

Seldipur Smartmidline is also available in 3Fr (see the corresponding technical file code 128.1306, 128.1308, 126.1310, 128.1312, 128.1315, 128.1320), in 4Fr (see the corresponding technical file code 128.1412, 128.1415, 128.1420, 128.1425) and 5Fr (see the corresponding technical file code 128.1515, 128.1520).

 

Additional Information:

• Item Code: 7030
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Valve body in flexible and transparent polyurethane with flat natural rubber sleeve acting as a non-return valve.
Note: This flat rubber sleeve never comes in direct or indirect contact with the patient or the user. Any allergic risk due to the presence of rubber can be excluded.

This device is connected directly onto the patient’s pleural or thoracic drain (adult, paediatric), or indirectly, using connector code 800.01 and an extension tube for neonates and infants.
This product allows thoracic drainage to continue without risk to the patient even when transported, as the non-return valve means that the drain does not have to be clamped.

Code 668.00: this two chamber device differs from the single valve code 669.10 in that it is possible to apply suction by manual compression of the compartment marked with an arrow (vacuum approximately 150 mbar). 

Additional Information:

• Item Code: 7144
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Disposable mask, inflatable cushion, vanilla scented.
Colour code on ring for fixation harness (except sizes 1 and 2). Not sterile.

Additional Information:

• Item Code: 7140
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Respiratory assistance device for patients with spontaneous ventilation allowing maintenance in the airways of a pressure greater than atmospheric pressure during the entire respiratory cycle.

Additional Information:

• Item Code: 7176
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Transparent PVC drain with radiopaque line. Markings every 2cm from 2 to 24cm after the eyes.

 

Non-traumatic proximal end which can be connected to a Heimlich valve or to collecting / suction system after shortening.

Drain available in French size 16 Fr, 20 Fr, 24 Fr, 28 Fr and 32 Fr.

Additional Information:

• Item Code: 7142
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Set securing the injection site of an elastomeric pump with Qimo Female and the distal end of its extension tube with Qimo Male. QimoPrime is used to prime the extension tube fitted with Qimo Male.

QimoPrime is a priming device which can be connected to any product fitted with Qimo Male. See corresponding technical file code 7210.81.

Qimo Male is a multi-purpose, closed, needle-free, I.V. connection device which has been designed for the preparation and safe administration of hazardous drugs. See corresponding technical file code 7210.91.

Qimo Female is a multi-purpose, closed, needle-free, I.V. connection device for blood sampling, intermittent injections or continuous infusions of fluids or drugs.

 

Additional Information:

• Item Code: 7010
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1