Akshar Pharma

• Used to maintain a patent airway and mechanically ventilate patients
• Made from non-toxic, non-irritant medical grade PVC
• Preformed tubes reduce the risk of kinking and improve access to the operative field
• Tube can be temporarily straightend for ease of suctioning
• Smooth polished murphy eye, distal end and tapered balloon end for atraumatic intubation and extubation
• Accurate and safe positioning ensured by graduation marks and tip-to-tip radiopaque line
• High volume / low pressure cuff ensures efficient low pressure cuff seal (For cuffed tubes)
• Universal 15 mm connecter at proximal end
• E.T.O sterile and pyrogen free. For single patient use

• SIZES

• Simplifies procedure for sampling of tracheal fluids
• Secure, sterile bottle ensures accuracy of culture tests
• Vacuum control connector allows easy and quick sampling procedure
• Graduated suction tube allows a reading for depth of intubation

  SIZES

  Size in FG	14	16	18	20	22	24
  Colour Code	Orange	Grey	Green	Pink	Blue	Yellow
  Length	45mm	45mm	45mm	32mm	25mm	19mm

Angiplast Pvt Ltd Provides the best Standard IV Infusion Set Manufacturers, Exporters And Suppliers in India at reliable rate.

Sharp spike vented (for bottles & bags) and non-vented (for plastic bottles) for better penetration. ISO 8536-4 compliant spike, ISO 594/1 & ISO 594/2 compliant end-connection. Superior quality of latex tube / flash bulb for self-sealing is utilized. Specially designed roller clamp improve control of flow. Top quality needle. Available with or without air-vent. Option available with Latex free. Non-toxic, Pyrogen Free & Sterilized by EO.

63″ IV Administration Set Vented, Vented Spike-20 drops-ml with Guard/Drip Chamber 50mm/Fluid Filter/Tube Latex/ Flow Regulator/Luer Tip Male Adaptor/Needle 21g x 1.25″ with Protector/ 2.7mm x 3.6mm PVC Tubing-Length 150cm/EO Sterile/Poly Pack Quantities per Carton = 600 pcs

Extension tube

Code     Int. Ø

mm        Ext. Ø

mm        Prim. vol.

ml           Length

cm          Pressure tested at

bar         Flow rate

ml/min

1155.60 1.0          2.0          1.1          100         40           16

1155.65 1.0          2.0          1.5          150         40           12

1155.70 1.0          2.0          2.0          200         40           7.5

1155.80 1.0          2.0          2.8          300         40           5.6

1155.90 1.0          2.0          3.7          400         40           4.8

1159.60 1.5          2.5          1.9          100         40           40

1159.65 1.5          2.5          2.7          150         40           28

1159.70 1.5          2.5          3.6          200         40           25

1159.80 1.5          2.5          5.2          300         40           19

1159.90 1.5          2.5          6.9          400         40           15

Arterial Leadercath is a catheter for arterial access inserted by the Seldinger technique.
Although it can be inserted in a variety of arteries, the most common sites for the placement of this catheter are the radial and the femoral artery.
The Seldinger technique makes arterial puncture easier particularly in hypotensive patients with a weak peripheral pulse and when arteries are atherosclerosed or narrow.

The product is supplied in a peel-pack containing:

• 1 stainless-steel puncture needle,
• 1 transparent PTFE (polytetrafluoroethylene) catheter with 2 black radiopaque lines and hub with fixation wings,
• 1 straight metallic guidewire.

20/180

Lifecath CT PICC Easy is a single lumen peripherally inserted central venous catheter in BIOSTABLE POLYURETHANE for mid to long-term central venous access, the length of which can be adjusted by the physician at its proximal end. Lifecath CT PICC Easy is compatible with pressure injection at 325 psi and up to 6ml/sec.This catheter is inserted with a MST peelaway introducer (Micro-Seldinger technique) allowing to puncture the vein with a very thin needle (21G).
Lifecath CT PICC Easy is supplied in a rigid blister pack (with double packaging) containing:

·         1 totally radiopaque catheter (60cm long) in biostable polyurethane with temporary wings

·         1 metallic stylet to make the catheter more rigid and thus make insertion easier

·         1 “T” proximal connector. The lateral port of the T connector can be used to inject saline solution

·         1 detachable extension line with a Robert clamp

·         1 safety introducer needle 21G x 7cm

·         1 straight nitinol guidewire 50cm, Ø 0.46mm with thumbfeed J straightener

·         1 peelable sheath + dilator 7cm

·         1 Luer slip syringe 10ml

·         1 slide clamp

·         1 measuring tape

·         1 Grip-lok, securement device

·         1 Bionector

·         1 safety scalpel

Lifecath CT PICC Easy advantages:

·         Preserved distal tip

·         Exact position of the tip at the cavo-atrium junction

·         Black mark of the tip confirming the complete withdrawal of the catheter

·         Centimetric marking

·         No excess of extracutaneous line

·         No re-placement of the PICC line

Titanium implantable port with large septum and silicone IV catheter (totally radiopaque), length 60cm, with anti-kinking sleeve. Markings every centimetre along the length of the catheter.
According to physician’s preference, the catheter is either detachable or pre-connected to the port.

The simple kit includes:

·         1 titanium implantable port

·         1 radiopaque silicone catheter not connected to the port codes 2216.016/.017/.019/.216, connected to the port codes 2216.026/.029

·         1 catheter guide

·         1 adapter to prime detachable catheters (codes 2216.016/.017/.019/.216)

·         1 straight needle with Huber bevel code 1057.27 (length: 25mm, diameter 22G – 0.7mm)

Code 2216.216 contains the above mentioned components and:

·         1 tunnellisation needle

·         1 IV cannula introducer, Intraflon type (code 122.27)

·         1 stylet (within the silicone IV catheter)

·         1 Hubsite needle (length: 20mm, diameter: 20G – 0.9mm) with Huber bevel and PUR extension tube for infusion code 1239.920

Other types of kits are available:

·         Kits with introducer for percutaneous insertion (with peel-away desilet introducer): see technical file codes 2216.117/.119/.126/.129.

·         A complete kit for percutaneous insertion with peel-away desilet, drapes and gowns: code 82216.116 (see corresponding technical file).

M.R.I compatibility = See “Additional information relating to the product”. 

I.V. extension tube in flexible, transparent polyurethane tubing with Vadsite and flat clamp. Octopus with Vadsite is a multi-purpose catheter accessory, a single lumen or multi-lumen I.V. extension tube with needleless connector(s), enabling intermittent injections or continuous infusions of fluids or medications and blood sampling depending on device variant. The variants with anti-reflux valves negate the…

Catheter extension tube (PUR) with Autoflush and clamp.
Diameter 1.5 x 2.5 mm – Priming volume: 0.39 ml – Flow rate 160 ml/min.

Triple layer extension tube for use with syringe pumps, PCA

Triple layer extension tube for use with syringe pumps, PCA

The Faucher tube is a gastric tube featuring a large diameter inserted through the mouth of the patient in the stomach for emergency suctioning and washout. It is used, for example, in the treatment of acute drug intoxication:

·         Tube made of transparent PVC

·         Open tip with 4 lateral eyes

·         Funnel made of silicone

·         Inner rigid tube  in polypropylene between the funnel and the PVC tube

·         Numerical markings every 5cm from 15 to 75cm

·         Length: 150cm.

The Faucher tube is available in size 27Fr, 30Fr, 33Fr and 36Fr.

Protect-a-set (code 836.02) and Octopus 2 (other codes) are polyurethane, transparent, supple with low dead space double-lumen extension tubes for IV catheters (peripheral or central venous) fitted with one or 2 Bionector.
To identify the different infusion lines, each line has a hub or a clamp of a different colour.
They allow to connect to the catheter several independant IV lines.

Code 836.02 is a double lumen extension tube with 1 non-return valve, 1 hub with Bionector and 1 clamp (white).
Length of tubes: 6 cm / 10 cm.
Code 841.232 is a double lumen extension tube with 2 non-return valves, 2 Bionector and 2 clamps (green).
Length of tubes: 3 cm / 3 cm.
Code 841.24 is a double lumen extension tube with 2 Bionector and 2 clamps (white).
Length of tubes: 10 cm / 6 cm.
Code 841.264 is a double lumen extension tube with 2 Bionector and 2 clamps (green and orange).
Length of tubes: 10 cm / 10 cm.
Code 841.266 E is a double lumen extension tube with 2 Bionector and 2 roberts clamps (white).
Length of tubes: 6 cm / 6 cm
Code 842.209 is a double lumen extension tube with 1 anti-return valve, 2 Bionector and 2 clamps (green and orange). The end without anti-retourn valve allows the sampling blood.
Length of tubes: 6 cm / 6 cm

• Used for Cervical Papanicolaou (Pap) smear screening
• Consists of Brush and the Wooden spoon Strip

• Used to maintain a patent airway and mechanically ventilate patients
• Made from non-toxic, non-irritant medical grade PVC
• Uniform spiral metal-reinforced tube wall to prevent the tube from kinking
• Reinforcement supports tube position and verification during X-ray
• Accurate and safe positioning ensured by graduation marks and tip-to-tip radiopaque line
• High volume / low pressure cuff ensures efficient low pressure cuff seal (For cuffed tubes)
• Universal 15 mm connecter at proximal end
• Recommended use of bite block / Guedel airway
• E.T.O sterile and pyrogen free. For single patient use

  SIZES – CUFFED
  5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm,8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm

   

  SIZES – PLAIN
  3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm,6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm

• 1 outer wrap 75 x 90 cm
• 2 drape towels 45 x 75 cm (code 30.45.75)
• 2 hand towels 33 x 38 cm
• 1 pelable transparent drape 50 x 50 cm opening Ø 4 cm
• 1 safety hypodermic needle 20G, 38 mm (yellow)
• 1 safety hypodermic needle 18G, 38 mm (pink)
• 1 silk suture 3.0 with curved needle
• 1 syringe 1 ml Luer Slip
• 2 syringes 3 ml Luer-lock
• 2 syringes 5 ml Luer-lock
• 1 paper measuring tape 60 cm
• 1 umbilical cotton tape 4 mm x 80 cm
• 2 adhesive strips 148 x 12.5 mm
• 1 safety scalpel n°11
• 10 swabs 5 x 5 cm, 4 ply white non-woven
• 10 swabs 10 x 10 cm, 4 ply, non woven
• 1 gallipot 60 ml red
• 1 gallipot 60 ml cristal
• 1 measuring guide
• 1 tray 20 x 15 x 4 cm transparent
• 1 Mayo Hegar needle holder 14 cm
• 1 straight Iris forceps 10 cm with teeth
• 1 full curved Iris  forceps 10 cm without teeth
• 1 dilator 14 cm Ø 2 mm
• 2 curved Halstead Mosquito forceps 13 cm without teeth
• 1 straight hemostatic Halstead Mosquito forceps 13 cm without teeth
• 1 curved Reynolds dissecting scissors 11 cm
• 1 curved Iris forceps 10 cm
• 1 straight Iris forceps 10 cm

Lipid-compatible ramps of one-way stopcocks with triple-layer extension tube. Ramp fitting: female Luer-lock/female Luer-lock. Code produit: 873.02

Code 37.09.14: Neo-HeLP SMALL - For newborns < 1 kg - Dimensions: 30 x 38 cm
Code 37.09.15: Neo-HeLP MEDIUM - For newborns between 1 kg and 2.5 kg - Dimensions: 38 x 44 cm
Code 37.09.16: Neo-HeLP LARGE - For newborns > 2.5 kg - Dimensions: 38 x 50 cm

Neo-HeLP is a polyethylene occlusive suit to prevent hypothermia of newborns.
This is a sterile suit in which the baby is placed immediately after birth without drying (before being admitted to the ICU).
Heat loss due to environmental factors (evaporation, convection, conduction and radiation) is limited.

Neo-HeLP consists of:

• a double layer of polyethylene (external layer: 50 microns, internal layer: 30 microns) which protects from drafts. The heat loss through radiation, convection and evaporation is limited.
• a hood which limits the dispersion of heat by the head. Adjustable to the infant's head, it does not let the air in.
• a pre-formed foam which helps to keep the baby's airway open and provides a barrier against heat loss by conduction, while maintaining his position and offering comfort to the baby.

Neo-HELP is an ingenious pouch completely transparent, to monitor the color of the newborn's skin and breath movements, and easy to use with direct access to the baby through the open / closed central opening.

Neo-HELP is suitable for all situations (delivery room, place of resuscitation, emergency, operating room, transport ...) and all users.

It is recommended not to use Neo-HeLP for more than 24 hours. In general, Neo-HeLP is used for a maximum of two hours after birth or in accordance with established clinical protocol.

aim at ZERO is a new campaign designed by Vygon to help hospitals win the fight against Hospital-Acquired Infections in Neonatal Intensive Care Units. This initiative provides infection reduction solutions at key stages of IV therapy: during the preparation phase, during the insertion of the line and during the infusion. Each product solution has been specially designed for the neonates, based on international recommendations and is supported by both clinical studies and data.

• Provided with flow control clamp to ensure proper use of bladder muscles .
• Self lubricated silicon shaft provides low friction surface to allow trauma free removal.
• Balloon made from low durometer, highly elastic silicon which provides very good tear strength.

• Used to secure and open airways for patients in case of emergencies
• Provided with rotatable flange for easy securing and pulling out.
• Made from soft, non-irritant medical grade PVC
• Anatomically designed with smooth round edges, thin wall and kink resistance for maximum patient comfort
• E.T.O. sterile & pyrogen free. For single use only

  SIZES

  4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm

• Used to maintain an unobstructed oro-pharyngeal airway
• Made from rigid, non-toxic medical grade PVC
• Colour coded in-built bite blocks to avoid airway occlusion and biting of tongue

  Size	Colour Code	Size	Colour Code
  000	–	2	Green
  00	Blue	3	Yellow
  0	Black	4	Red
  1	White	5	Orange

Multicath2 UP is a XRO polyurethane central venous catheter introduced by Seldinger technique.
It consists of 2 lumens completely separated on the total length of the catheter. Each lumen leads, at the distal tip of the catheter, to a distinct hole. At the proximal end, the lumens of the catheter are connected to extension tubes of different lengths. Each extension tube includes a different coloured hub and is marked “Distal” and “Proximal” so as to identify easily the different infusion lines.

Multicath2 UP is available in 4 lengths: 12.5cm (code 157.072), 16cm (code 157.172), 20cm (code 157.272), or 30cm (code 157.372).
It is presented in a rigid blister pack containing:

• 1 polyurethane catheter (totally radiopaque) with fixation wings and centimetric graduations from 9cm from distal tip. Smooth distal end,
• 1 safety needle (Seldisafe) 18G, 70mm, to avoid needlestick injuries,
• 1 safety scalpel,
• 1 BLS valve (Blood Less System) on the Seldisafe to limit blood loss and air embolism,
• 1 adaptor for pressure transducer,
• 1 Teflon-coated “J” Nitinol guidewire (particularly kink-resistant) with guide-advancer,
• 1 dilator 8.5Fr / Length: 100mm,
• 2 caps,
• 1 5ml syringe,
• 1 supplementary fixation wing for 16, 20, and 30cm catheters,
• 1 ECG cable (Combcard) for 16, 20, and 30cm catheters.

Gastro-duodenal Nutrisafe2 feeding tube in silicone for neonates, infants and children.

Weighted tip with metallic olive, closed end, 2 lateral eye, radiopaque tube.

This feeding tube has a length of 125 cm and markings every centimetre from 5 to 70 cm.

The Nutrisafe2 connection features a purple colour and specific dimensions meeting the requirements of ISO 80369-1. Consequently, accidental misconnections between devices intended for enteral nutrition and devices intended for other indications (venous access, spinal, epidural, vesical, respiratory…) are avoided and the right administration route is respected.

This feeding tube also incorporates a colour-coded obturator according to diameter.

Other non-weighted Nutrisafe2 silicone feeding tube are available: code 2331.xxx (50 cm long) and 2332.xxx (125 cm long). See corresponding technical file.

Maximal duration of use: 29 days.

• Used for high pressure monitoring, and connection between syringe  infusion pump and patient
• Made from non-toxic medical grade PVC
• Can withstand a pressure of 580 PSI
• Provided with universal male luer lock and female luer lock at either end to  ensure securely fit all standard equipment
• Optional lengths available

  SIZES

  Length	110cm	150cm	200cm
  Prime Volume	0.9ml	1.40ml	1.80ml

• Used to access the umbilical vessels of pre-mature or newly – born babies
• Made from non-toxic, medical grade PVC
• Smooth round tip for atraumatic insertion and well-finished surface  facilitate smooth passage in the vein
• Markings at every cm to ascertain depth of insertion, radio opaque line  ascertain position during scans
• Proximal end provided with Luer female connecter for easy connection to  the I.V. therapy equipment

  SIZES

  Total Length – 35cm

   

  FG	4	5	6	8	10
  Colour Code	White	Grey	Green	Blue	Black

• Used for introduction of enema solution into rectum
• Made from non-toxic, non-irritant medical grade PVC
• Open distal end is open with one lateral eye for efficient drainage
• Proximal end with colour coded funnel connecter for easy connection to the suction equipment
• Funnel connecters are colour coded for instant size identification
• Optional: Available in 40cm length

Tracheal and bronchial suction catheter.
Open tip. Proximal connector with lateral eye for finger tip control (with integral closing cap).
Fr 4 – 5 – 6 – 7 – 8 – 10: with 2 lateral eyes
Centimetre graduations from 5 to 20 cm. Length 29 cm
Fr 12 – 14 – 16 – 18: no lateral eyes
Centimetre graduations from 5 to 20 cm. Length 42 cm

Quantity box/case: 50/450

• Provided with Suction & Bronchoscopy Ports.
• Compatible with all Breathing and Ventilator circuits.
• Double swivel connector and flexible tubing provides mobility and flexibility to the patient end of the circuit.
• The tubes are made of a special flexible co-polymer and have a minimal compliance with low dead space volume.
• The catheter mount is fitted with a double swivel connector
• Each catheter mount has a 22 mm female / 15 mm male end to connect to the breathing system and 15 mm female end to connect to the endotracheal tube or laryngeal mask.

Catheter in radiopaque and transparent PVC, can be used for umbilical venous catheterisation (parenteral nutrition, drug administration, exchange transfusion, blood sampling…) or for umbilical arterial catheterisation (blood gas analysis, blood pressure measurement…)
Distance markings every centimetre from 4 to 25 cm.
Open and smoothed distal tip to reduce vascular trauma.
Available in 6 catheter diameters: 3.5* – 4 – 5 – 6 – 7 and 8 Fr
Length: 37 cm
* to be ordered under code 270.03

Quantity box/case: 15/225