Akshar Pharma

 

The POLYPERF Safe curved safety Huber needle is available:

·         in various lengths (15mm, 17mm, 20mm, 25mm, 30mm and 35mm) and diameters (19G, 20G and 22G),

·         with a lateral injection port (codes 61xxxx) or without a lateral injection port (codes 60xxxx).

It is provided with:

·         Luer-Lock connectors on which are screwed:

x closed protective caps (end of the main line) which must not be used as sealing caps,
x injection sites with a silicone septum on the ‘Y’ connectors,

·         Clamps.

Tubing is DEHP (di-2 ethylhexyl-phthalate) free.

POLYPERF Safe is packaged in single thermosealed TYVEK pouch.
POLYPERF Safe is packaged in cartons of 12 units.

 

 

Additional Information:

• Item Code: 7018
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

There are two types of port:

·         Port with catheter to connect in silicone (codes VPE2005ISP and VPE2007ISP) or in polyurethane (codes VPE2015ISP and VPE2016ISP).

·         Port with pre-connected catheter in silicone (codes VPE2105ISP and VPE2107ISP) or in polyurethane (codes VPE2115ISP and VPE2116ISP).

Each percuteneous placement kit Polysite ISP contains:

·         One titanium and POM (polyoxymethylene) micro port with a silicone septum,

·         One 60cm (for paediatric reference with 5Fr catheter) or 80cm XRO silicone or polyurethane catheter. Graduation every cm with a numbered marking every 5cm from 5 to 40cm,

·         Two connection rings (only one for pre-connected references) with a Phynox thread containing nickel,

·         One straight Huber needle (22G),

·         One vein pick,

·         One flushing connector (for non pre-connected references), pre-connected to the catheter,

·         One 10ml syringe,

·         One marked J guidewire – 0.018″ – 40mm for paediatric references VPE2xx5ISP and 0.035″ – 60mm for all other references codes VPE2xxxISP,

·         One echogenic introducer needle – 20G – 38mm for paediatric references VPE2xx5ISP and 18G – 70mm for all other codes VPE2xxxISP,

·         One tunneler diameter 2mm – length 18cm for paediatric references VPE2xx5ISP and diameter 2.5mm – length 23cm for all other references VPE2xxxISP,

·         One peelable introducer – length 12cm for paediatric references VPE2xx5ISP and 17cm for all other codes VPE2xxxISP.

Additional Information:

• Item Code: 7020
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

0.22 µm (anti-bacterial) filters for retaining microbial particles and contaminants contained in solutions. Luer-lock fittings.

Code 809.22 is radiosterilized.

 

 

Safe

• Easy identification of our neurafit range with yellow protectors; the colour associated with NRFit

• Recessed notch indicates the direction of the needle eye plus accurate administration of anaesthetics.

Efficient

• Crystal clear hub has fast CSF flashback visualisation

• Easy to see CSF through magnified hub • Spinal introducer with precision matched stylet delivers quick and easy one step removal. Plus instant confirmation of needle tip position.

 Ease of use

 • Available with slip and lock connections

• Familiar connections mean there is no need to change established habits when switching to NRFit devices

• Introducer has an ergonomic hub for easy handling.

Additional Information:

• Item Code: 7132
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Vadsite is a needleless access device which prevents needle-stick injuries, the risk of air embolism or blood loss.The device automatically closes when the infusion line or syringe has been disconnected.On Vadsite, it is possible to connect all intravenous devices comprising a male Luer or male Luer-lock end (syringes, infusion sets…)Vadsite is resistant to lipids and most disinfecting agents used in hospitals.Vadsite is approved for use with power injectors.

Vadsite code 898.03 is supplied in a soft blister pack (without protective cap in the male cone).Vadsite code 898.038 is supplied with a cap (covering the cone of the male Luer end). Packaging : supple blister pack.
Vadsite is lipid-resistant.
Vadsite is approved for use with powers injectors (CT-scan).Maximum pressure resistance : 350 psi (24 bars).To inject contrast medium products (Visiopaque 320 mg iodine/ml), the flow rate has been measured as such :29 psi (2 bars) : > 5 ml/s73 psi (5 bars) : > 10 ml/s
Vadsite flowrate: 170 ml/min

Additional Information:

• Item Code: 7097
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Two types of port existing:

·         Port with catheter to connect in silicone (codes VPE4008ISP and VPE40010ISP) or in polyurethane (codes VPE4017ISP, VPE4018ISP and VPE4019ISP).

·         Port with pre-connected catheter in silicone codes VPE4108ISP and VPE41010ISP) or in polyurethane (codes VPE4117ISP, VPE4118ISP and VPE4119ISP).

Each percuteneous placement kit Polysite ISP contains:

·         One titanium and POM (polyoxymethylene) mini port with a silicone septum,

·         One 60cm XRO silicone or polyurethane catheter. Graduation every cm with a numbered marking every 5cm from 5 to 40cm,

·         Two connection rings (only one for pre-connected references) with a Phynox thread containing nickel,

·         One straight Huber needle (22G),

·         One vein pick,

·         One flushing connector (for non pre-connected references), pre-connected to the catheter (except for code VPE4019ISP),

·         One 10ml syringe,

·         One J guidewire graduated every 10cm – 0.035″ – 60mm,

·         One puncture needle – 18G – 70mm useable length,

·         One tunneler diameter 2.5mm – length 23cm,

·         One peelable introducer – length 17cm.

 

Additional Information:

• Item Code: 7017
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Easylit is a range of enteral feeding pumps, designed for stationary use, ideal for overnight feeding, hospitalised patients and elderly people.
Two models are available: Easylit4: the stationary pump which only requires flow rate programming. Easylit6: the all inclusive stationary pump when flow rate and volume programming are needed. Features & benefits:

·         Intuitive and easy to use: short learning curve

·         Powerful: the rotary peristaltic motor helps delivering high viscosity food without any obstruction

·         Quiet: the continuous rotary peristaltic system avoids repetitive start and stop noises

·         Safe: visual and audible alarms, calibrated to avoid untimely alarms due to overpressure (in case of cough, brief kinkings, etc.).

Easylit4:

·         Weight: 1400gr (3.08lb)

·         Flowrate: 1 – 600ml/h in 1ml increment

·         Battery: Ni-MH

·         Battery autonomy: 7h at 125ml/h

·         Selfpriming

·         Detachable battery charger (code 0VEPLCHA02).

 

Additional Information:

• Item Code: 7066
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Code 526.00: Rotating connector for endotracheal tube.
Materials: Swivel connector (POM), green cap (PE)

Code 526.01: Swivel connector for endotracheal tube for bronchoscopy
Materials: Swivel connector (PP), valve (silicone)
The silicone seal accepts bronchoscope diameters from 3.4 to 5.9 mm.
Taper fittings: standard 15 mm – Swivel on both the male and female taper allow greater patient movement.

Additional Information:

• Item Code: 7148
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Paediatric Multicath 2 is a double-lumen radiopaque polyurethane central venous catheter inserted in the internal jugular, subclavian or femoral vein using the Seldinger technique.It is a 4.5 Fr catheter with totally separated lumen. Each lumen can be identified by “DISTAL” or “PROXIMAL” printed on the extension tube at the proximal end of the catheter.The user can choose between 2 types of introducer: a needle or a short I.V. cannula.Both lumen have the same diameter: 20G.The catheter features centimetric graduations from 5 cm from the distal tip. No marking on catheters 6 cm long.
Paediatric Multicath 2 is available with :

• 1 STANDARD STRAIGHT guidewire in stainless steel (codes 1202.xx3 / 1203.xx3)
• 1 TEFLON-COATED STRAIGHT stainless steel guidewire (codes 1202.xx1 / 1203.xx1) or
• 1 TEFLON-COATED NITINOL “J” guidewire particularly kink-resistant (codes 1202.xx2 / 1203.xx2)

Multicath 2 is presented in a rigid blister pack containing:

• 1 double-lumen radiopaque PUR catheter with intermediate hub fitted with fixation wings Ext. Ø 1.5mm – 4.5Fr  – Length: 6 – 8 – 12.5 – 20 or 30cm
• 1 introducer echogenic needle Ext. Ø 0.8mm – 21G – Length 40mm
• 1 short IV catheter, 22G, Length 25mm
• 1 guidewire (see information here-above) with guide advancer

Diameter of the guide : 0.46mm – Length : 40cm except code 1203.202 and 1203.302 : 70cm

• 2 5Fr dilators (Length 38mm and 62mm), except code 1202.063 and 1203.123: 1 5Fr dilator 62mm long
• 2 injection caps
• 1 syringe 5ml
• 1 supplementary fixation wing
• 1 scalpel

Additional Information:

• Item Code: 7088
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Multicath3 UP is a XRO polyurethane central venous catheter introduced by Seldinger technique.

 

Additional Information:

• Item Code: 7085
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Multicath 3 (paediatric model) is a triple-lumen radiopaque polyurethane central venous catheter inserted in the internal jugular, subclavian or femoral vein using the Seldinger technique.At the proximal end, the 3 lumen of the catheter are connected to extension tubes of different lengths; besides each extension tube is marked “DISTAL”, “MEDIUM” or “PROXIMAL” and includes a different coloured hub so as to identify easily the different infusion lines. Extension tubes fitted with Robert clamps.The user can choose between 2 types of introducer: a needle or a short I.V. cannula.
Multicath 3 is available :either with A STRAIGHT STANDARD stainless steel guidewire (codes 1231.123 / 1233.063/083/103)or with 1 J NITINOL GUIDEWIRE, particularly kink-resistant (codes 1231.122 / 1233.062/082/102/202/302)or with 2 GUIDEWIRES : a STRAIGHT TEFLON-COATED STRAIGHT guide and 1 J NITINOL guide (codes 1231.121 / 1233.061/081/101).
Multicath 3 is presented in a rigid blister pack containing:

• 1 triple-lumen PUR catheter Ext. Ø 1.5 mm – 4.5 Fr, totally radiopaque with fixation wings and centimetric graduations from 5 cm from the distal tip
• 1 introducer echogenic needle Ext. Ø 0.8 mm – 21G – Length 40 mm
• 1 short IV catheter, 22G, Length 25 mm
• 1 or  2 metallic guidewires (see information here-above)

Diameter of the guide(s) : 0.46 mm – Length : 40 cm except code 1233.202 and 1233.302 : 70 cm

• 2 dilators 5 Fr – Length 38 mm and 62 mm – except for codes 1231.123 and 1233.063/083/103 which contain one dilator 5 Fr Length 62 mm,
• 3 injection caps
• 1 syringe 5 ml
• 1 supplementary fixation wing
• 1 scalpel

Additional Information:

• Item Code: 4004
• Production Capacity: 5000
• Delivery Time: 7
• Packaging Details: 1*1

Paediatric Multicath 2 is a radiopaque 5.5 Fr polyurethane double-lumen catheter inserted by the Seldinger technique in the internal jugular, subclavian or femoral vein for paediatric use. Dual lumen Multicath 5.5 Fr consists of two lumen completely separated on the total length of the catheter. Each lumen leads, at the distal tip of the catheter, to a distinct hole. At the proximal end, the 2 lumen of the catheter are connected to extension tubes of different lengths; besides, each extension tube is marked “DISTAL” and “PROXIMAL” and includes a different colored hub so as to identify easily the different infusion lines.

The diameter is the same for the distal and for the proximal lumen: 2 x 17 G.

The user can choose between 2 types of introducer: 1 echogenic puncture needle or 1 short I.V. cannula.

Multicath 2 is presented in a rigid blister pack containing:

• 1 double-lumen radiopaque catheter with intermdiate hub fitted with soft fixation wings centimetric markings from 5 cm from the distal tip Ø 5.5Fr – Length 8 cm – 12.5 cm – 15 cm – 20 cm or 30 cm. Supple distal end,
• 1 echogenic introducer needle ext. Ø 0.8 mm – 21G – Length 40 mm,
• 1 short I.V. cannula 22G – Length 25 mm,
• 1 J teflon-coated Nitinol guidewire with guide advancer, Length 40 cm for codes 157.508, 157.512 and 157.515 and 70 cm for codes 157.520 and 157.530,
• 2 dilators (6Fr length 3 cm and 5 cm),
• 2 injection caps,
• 1 5 ml syringe,
• 1 secondary fixation wing,
• 1 scalpel.

Additional Information:

• Item Code: 5019
• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: 1*1

Antimicrobial paediatric double-lumen central venous catheter impregnated with antibiotics (Rifampicin and Miconazole) Code 6203: centimetre markings from 5 to 12 cm, (code 6202: no markings).  The user can choose from 2 types of introducer, i.e. needle or I.V. cannula.  The diameter of the distal lumen is the same as that of the proximal lumen: 2 x 20G. Kink-resistant Nitinol “J” guidewire
Presented in a rigid blister pack containing:

Additional Information:

• Item Code: 5005
• Production Capacity: 5000
• Delivery Time: 7 DAYS
• Packaging Details: 1*1

Multicath5 HFS is a XRO polyurethane central venous catheter introduced by Seldinger technique.
Multicath High Flow has been designed to achieve rapid safe volume replacement through the proximal lumen and allow intravenous therapy, infusion and blood sampling.
Moreover the HF catheters present a high pressure distal line (marked « HP ») to enable a flowrate of 5ml/s at a viscosity of 11.8mPas under 150psi/10bar.
It consists of 5 lumens completely separated on the total length of the catheter. Each lumen leads, at the distal tip of the catheter, to a distinct hole. At the proximal end, the lumens of the catheter are connected to extension tubes of different lengths. Each extension tube includes a different coloured hub and is marked “Distal”, “Medial 1”, “Medial 2”, “Medial 3”, and “Proximal” so as to identify easily the different infusion lines.

Multicath5 HFS is available in 4 lengths: 12.5cm (code 159.912), 16cm (code 159.916), 20cm (code 159.920), or 30cm (code 159.930).
It is presented in a rigid blister pack containing:

• 1 polyurethane catheter (totally radiopaque) with fixation wings and centimetric graduations from 9cm from distal tip. Smooth distal end,
• 1 safety needle (Seldisafe) 18G, 70mm, to avoid needlestick injuries,
• 1 BLS valve (blood less system) fitted to the Seldisafe puncture needle, to minimize blood loss and risk of air embolism,
• 1 safety scalpel,
• 1 Teflon-coated “J” Nitinol guidewire (particularly kink-resistant) with guide-advancer,
• 1 dilator 8.5Fr / Length 100mm,
• 5 caps,
• 1 5ml syringe,
• 1 supplementary fixation wing for 16, 20, and 30cm catheters,
• 1 ECG cable (Combcard) for precise tip placement for 16, 20, and 30cm catheters.

Additional Information:

• Item Code: 4005
• Production Capacity: 5000
• Delivery Time: 7
• Packaging Details: 1*1

I.V. catheter introduced by the Seldinger technique. Radiopaque polyurethane catheter with fixation wings and integral extension tube (PUR) with clamp.

 

Additional Information:

• Item Code: 7086
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Rocket® IPC™ Indwelling Pleural & Peritoneal Catheter Mini Insertion Set is indicated for intermittent, long term drainage of symptomatic, recurrent, pleural effusion and peritoneal ascites Including malignant pleural effusions that do not respond to medical treatment of underlying disease.

INSERTION KIT:

• 1 x 16FG x 40cm silicone indwelling catheter
• 1 x drainage line
• 1 x valve cap
• 1 x tunnelling forceps
• 1 x foam catheter pad
• 1 x clear-film dressing
• 1 x 18G guidewire insertion needle
• 1 x J-Tip guidewire
• 1 x 16 Fr tearaway sheath/dilator
• 1 x 10ml syringe

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*10

Rocket IPC Indwelling Pleural & Peritoneal Catheter Insertion Set with Metal Tunneller is indicated for intermittent, long term drainage of symptomatic, recurrent, pleural effusion. Including malignant pleural effusions that do not respond to medical treatment of underlying disease.

The system features:

SILICONE CATHETER:

• Soft, kink resistant material approved for long use, giving increased patient comfort.
• 16Fg x 40cm catheter with 24cm fenestrated section, large diameter holes to maximise drainage and reduce occlusion risk.
• Polyester cuff to promote rapid tissue in-growth, minimising infection risk and aiding catheter security.

INSERTION KIT:

• A complete kit with metal tunneler for optimum catheter positioning and improve patient comfort
• Simple, cost effective, long term treatment for pleural effusion.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

The Rocket Seldinger Chest Drainage Kit combines the benefits of small bore catheterisation with the ease and reliability of the Seldinger approach whether under direct vision, x-ray screening or ultrasound guidance. Small bore catheters have been shown to be as effective as larger drains without the disadvantage of patient discomfort 1,2

For percutaneous insertion of a chest tube for pleural drainage of fluid and air and is particularly suitable for: 3

• Pneumothorax, spontaneous or iatrogenic
• Effusions, benign or malignant, except those with high protein content.
• Low viscosity empyema.

In response to concerns and advice from British Thoracic Society members, Rocket Seldinger Chest Drainage Set now contains shorter (10cm) dilators with secondary safety stops. These help to minimise the risks of over-insertion associated with the traditional 20cm dilator.

References:
1. Catheters smaller than 24 French gauge can be used for chest drains Taylor PM. BMJ (1997) 315:186
2. Management of Malignant Pleural Effusions Antunes G, Neville E,Thorax (2000) 55:981-983
3. Clinical Evaluation of Seldinger Drainage Kit. Beaumont A C et al Proceedings of Intensive Care Society Meeting. December 1999.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*10

Basic kit containing one catheter code 185.10, described above and one 17G Tuohy needle with metal hub.

 

Additional Information:

• Item Code: 7112
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

PVC nasal oxygen catheter, 40 cm long with open distal end and 16 lateral eyes. The proximal end features a PVC straight conical connector which must be connected to an oxygen connecting tube (e.g. code 597) linking the oxygen nasal catheter to the source of oxygen. This proximal end has also a polyether piece of foam.
Fr 08 – 10 – 12 – 14 – 16 – 18: Length 40 cm.

Additional Information:

• Item Code: 7126
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Kit includes one 10 ml syringe for loss of resistance technique (code 1018.10) in addition to items in Mini-kit code 189.50.

20/120

 

 

 

Additional Information:

• Item Code: 7146
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

0.22 µm (anti-bacterial) filter for regional anaesthesia (epidural, continuous plexus and peripheral nerve blocks…), for retaining microbial particles and contaminants contained in solutions. Luer-lock fittings.

Additional Information:

• Item Code: 7154
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Two types of implantable port existing:

·         Micro implantable port with catheter to connect in silicone (pediatric code VPE2005ECHO and aldut code VPE2007ECHO) or in polyurethane (pediatric code VPE2015ECHO and adult code VPE2016ECHO).

·         Micro implantable port with a pre-connected catheter in silicone (pediatric code VPE2105ECHO and adult code VPE2107ECHO) or in polyurethane (pediatric code VPE2115ECHO and adult code VPE2116ECHO).

Each Echo-guided placement kit Polysite ECHO contains:

1 – A pouch containing:

·         One titanium and POM (polyoxymethylene) Micro port with a silicone septum,

·         One 60cm (for the pediatrics codes with a 5Fr catheter) or 80cm (for the others codes) XRO silicone or polyurethane catheter. Graduation every cm with a numbered marking every 5cm from 5 to 40cm,

·         Two connection rings (only one for pre-connected references) with a Phynox thread containing nickel,

·         One straight Huber needle – 22G,

·         One vein pick,

·         For all non-pre-connected references, one flushing connector pre-connected to the catheter,

·         One peelable introducer – 12cm (for the pediatrics codes) and 17cm (for the others codes),

·         One 10ml syringe,

·         One Raulerson metallic guidewire introducer,

·         One marked J guidewire with thumbfeed J straightener (0.018”- 40mm for the pediatrics codes and 0.035’’ – 60mm for the others codes),

·         One echogenous puncture needle – 20G – 38mm useable length for the pediatrics codes and 18G – 70mm for the others codes,

·         One tunneler Ø 2mm – Length 18cm (for the pediatrics codes) or Ø 2.5mm – Length 23cm (for the others codes).

2 – A CIV-FLEX Echoset containing:

·         One latex-free guidance probe sheath,

·         One sterile ultrasound gel pouch,

·         Two supporting elastic straps for the protective cover,

·         One sterile drape.

Additional Information:

• Item Code: 4029
• Production Capacity: 5000
• Delivery Time: 7
• Packaging Details: 1*1

Proximal connection

ENPlus connection mitigates risks of misconnection with parenteral solution bags. Enteral nutrition bags are available in 500 ml, 1200 ml and 1500 ml. The screw cap connection allows a direct connection to bottles.

Lateral connection

Lateral connection of giving sets is available with the safe connection ENFit™ or with Vygon’s safe system nutrisafe2. (2)

Distal connection

Distal connection of giving sets is available with the safe connection ENFit™ or with Vygon’s safe system nutrisafe2. (2) Giving sets are delivered with a christmas tree connector screwed on the distal connection.

Additional Information:

• Item Code: 6015
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Double catheter for blind bronchoalveolar lavage for diagnosis of ventilator-associated pneumonia. The distal end of the external (radiopaque) catheter is closed by a polyethylene glycol plug.
At the proximal end, there is a spacer between the external and internal catheters to avoid premature expulsion of the polyethylene glycol plug.
Code 538.34: Aspisafe 2 for bronchoscope

Additional Information:

• Item Code: 7129
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

PVC Pump set – Ø 3.0 x 4.1 mm – Length 250 cm – Priming volume 21 ml (without the bags)
Pump set for enteral nutrition with 2 bags 1200ml for Easymoov6 pump. The pump set has a hydration line with a non-return valve which allows the patient to have a progressive hydration.
It is composed of :

• 2 lines
• 2 proximal connectors with 2 bags 1200ml
• 1 non return valve
• 2 clamps
• 1 three way cassette
• 1 pump adaptor
• 1 Y connector ENFit
• 1 distal connector ENFit
• 1 christmas tree adaptor

Additional Information:

• Item Code: 7025
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Mini set for epidural anaesthesia containing :
- 1 Tuohy needle 16 G, 80 mm long with transparent hub and removable wings.
The needle has graduations every centimetre. The transparent hub allows to quickly visualize an accidental reflux of blood or of CSF.
- 1 PEBAX catheter (polyether blockamide), 19 G, 90 cm long with open distal end (code 5191.601) or with closed distal end and 3 lateral eyes (code 5191.801).
The catheter has markings every centimetre from 5 to 20 cm and a black mark at the distal end to ensure that the entire catheter has been withdrawn.
A catheter guide which connects onto the Tuohy needle facilitates the insertion of the catheter in the epidural space.
- 1 Easy-lock catheter hub with pre-mounted epidural filter 0.22 µm. Filter surface area : 4.3 cm², priming volume : 0.3 ml, pressure resistance : 5.2 bar
- 1 10 ml syringe for loss of resistance technique
- 1 yellow label for epidural access identification 

Additional Information:

• Item Code: 7113
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Product Specification Additional Information

Additional Information:

• Item Code: 7058
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The easymoov6 ambulatory pump is a continuous flow, rotary peristaltic pump, guaranteeing a constant flow ratethroughout the feeding sequence. Lightweight and compact, it fully meets the constraints inherent to ambulatory use. It is also suitable for stationary use and can be attached to a drip stand, using the pole clamp accessory provided with the pump.
Specifications:

• Dimensions: 137mm long – 126mm wide – 63mm thick
• Weight: 650 g. (with battery)
• Casing: PC ABS V0
• Protection: IP 44
• Battery: NiMH (Nickel Metal Hydride) 7.2V 2Ah
• Screen: LCD
• Front panel: 6 keys
• Indicators: 4 lights
• AC adapter: External AC/DC (ref: 0VEPM6Cha) – IP 40
• Input: 100 V ~240 V ~ 50 Hz – 60 Hz
• Output: 12V continuous / 1.5A
• Recommended operating temperature: 5° to 40°C
• Humidity level during operation from 15% to 93%
• Recommended charging temperature: 10° to 40° C

Performances:

• Volumetric, continuous flow, rotary peristaltic pump for enteral feeding
• Range of flow rate: from 1 to 400 ml/h – Setting increment: 1 ml/h
• Accuracy: +/-5 % with tubing for easymoov6 pump
• Priming: automatic tube filling at 600 ml/h for 1min45secondes
• Occlusion pressure: 0.9 bar  +/- 0.2 bar
• Volume range: from 1 to 9,999 ml/h – Setting increment: 1 ml
• Feeding setting memory capacity: 24 h
• Pause: 2 minutes repeatable – unlimited if manual
• Battery life: 20 hours at 125 ml/h (fully charged battery)
• Charging time: 2h30 hours (depending on battery condition and room temperature)

Additional Information:

• Item Code: 7065
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Code 802.01: connector for finger-tip control of suction for suction catheters size 4Fr, 5Fr, 6Fr, 7Fr and 8Fr * WITH SMALL FUNNEL CONNECTOR.
Code 802.00: connector for finger-tip control of suction for suction catheters size 10Fr * to 21Fr WITH LARGE FUNNEL CONNECTOR.

*Note: Code 530.10 and 533.10 (10Fr suction catheters) have a SMALL FUNNEL. Consequently with these 2 suction catheters connector code 802.01 must be used.

Additional Information:

• Item Code: 4016
• Production Capacity: 5000

Bore: 2.1 mm 50/900 Code produit: 872.10 Bore: 2.1 mm 50/900

Bore: 2.1 mm 50/900 Code produit: 872.10 Bore: 2.1 mm 50/900

 

Additional Information:

• Item Code: 5026
• Production Capacity: 5000
• Delivery Time: 7days
• Packaging Details: 1*1

Bore: 2.1 mm 50/900 Code produit: 871.10

Bore: 2.1 mm 50/900 Code produit: 871.10

 

Additional Information:

• Item Code: 5027
• Production Capacity: 5000
• Delivery Time: 7days
• Packaging Details: 1*1

Female Luer-lock stopper in ABS material.

Female Luer-lock stopper in ABS material.

 

Additional Information:

• Item Code: 5010
• Production Capacity: 5000
• Delivery Time: 7 days
• Packaging Details: 1*1

Mini set for epidural anaesthesia containing:

• 1 Tuohy needle 18G, 80mm long with transparent hub and removable wings. Metallic stylet for codes 5191.087, 5191.387 and 5191.337, plastic stylet for codes 5191.3371 and 5191.3871.

The needle has graduations every centimetre. The transparent hub allows to quickly visualize an accidental reflux of blood or of CSF.

• 1 PEBAX catheter (polyether blockamide), 20G, 90cm long with open distal end (code 5191.087) or with closed distal end and 3 lateral eyes (codes 5191.337 / 5191.387 / 5191.3371 / 5191.3871). Codes 5191.337 and 5191.3371 have a catheter with flexible distal tip. The catheter has markings every centimetre from 5 to 20cm and a black mark at the distal end to ensure that the entire catheter has been withdrawn.

A (yellow) catheter guide which connects onto the Tuohy needle facilitates the insertion of the catheter in the epidural space.

• 1 Easy-lock catheter hub with pre-mounted epidural filter 0.22 µm. Filter surface area : 4.3cm², priming volume : 0.3ml, pressure resistance : 5.2 bar
• 1 10ml syringe for loss of resistance technique
• 1 yellow label for epidural access identification

Additional Information:

• Item Code: 7168
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

FreeO2 is an automated oxygen delivery device that monitors respiratory parameters in spontaneously breathing patients and automatically adjusts administered oxygen flow to patient’s needs using a closed-loop algorithm.

Therapy Target Hospital Departments: Emergency, Recovery Room, Post-Surgery, Anaesthesia, Interventional cardiology and Pneumology.

FreeO2 is an automated oxygen regulator intended to be:

• Operated by trained personnel.
• Used under the direction of a physician in a clinical setting.
• Used to titrate the oxygen flow.
• Used to maintain a target SpO2 level, set by clinicians, for spontaneously breathing patients older than 1 month.

Patient population: Spontaneously breathing children to adult patients.

A FreeO2 device should always include the following standard accessories:

• User Manual – Language (code VAVFO2-OMP-XX)
• VESA* mounting plates kit (code VAVACC-0001)
• Oxygen Hose, 3m country specific (code VAVHOS-XXXXX)
• AC/DC main adaptor 24V 30W + 3m power cord (code VAVACCME30A2403)
• FreeO2 outlet tubing nipple 9/16″ (code VAVACC-11535)

*Video Electronics Standards Association (VESA) defines standards for mounting interfaces on monitors.

Additional Information:

• Item Code: 7179
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Mini set for epidural anaesthesia containing :
– 1 Tuohy needle 16 G, 80 mm long with transparent hub and removable wings.
The needle has graduations every centimetre. The transparent hub allows to quickly visualize an accidental reflux of blood or of CSF.
– 1 PEBAX catheter (polyether blockamide), 19 G, 90 cm long with open distal end (code 5191.601) or with closed distal end and 3 lateral eyes (code 5191.801).
The catheter has markings every centimetre from 5 to 20 cm and a black mark at the distal end to ensure that the entire catheter has been withdrawn.
A catheter guide which connects onto the Tuohy needle facilitates the insertion of the catheter in the epidural space.
– 1 Easy-lock catheter hub with pre-mounted epidural filter 0.22 µm. Filter surface area : 4.3 cm², priming volume : 0.3 ml, pressure resistance : 5.2 bar
– 1 10 ml syringe for loss of resistance technique
– 1 yellow label for epidural access identification 

Additional Information:

• Item Code: 7171
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Fr 21: Length 180 cm.

Fr 21: Length 180 cm.

Fr 21: Length 180 cm.

 

Additional Information:

• Item Code: 7125
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Can be adjusted to fit any support. Not sterile. 3/144 Code produit: 870.01

 

Additional Information:

• Item Code: 5028
• Production Capacity: 5000
• Delivery Time: 7days
• Packaging Details: 1*1

R54400-DP Rocket® Pleural™ IPC Discharge Pack

The Rocket® IPC™ Discharge Pack contains those items needed for care in the period immediately after discharge from hospital

Contents:

• 3 x R54400 Rocket® IPC™ Dressing Packs each including a 500ml drainage bottle
• 1 x R544100-00-CP Rocket® IPC™ Valve Cap
• 1 x R544100-00-DL Rocket® IPC™ Drainage Line
• 1 x Rocket® IPC™ Pharmacy Information Card
• 1 x Rocket® IPC™ Pleural Drainage Patient & Carer Information Booklet

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Enteral nutrition ENFit pump set with double line for Easylit pump – Ø 3.0 x 4.1 mm – 250 cm Long – Dead space 22ml
This pump set is compatible with Easylit 4, Easylit 6, P7000, Flocare 800 and Compat pumps.
It is composed of:

• 2 EN+ proximal connectors
• 2 lines
• 2 roller clamps
• 1 drip chamber
• 1 ENFit Y connector
• 1 ENFit distal connector
• 1 christmas tree connector

Additional Information:

• Item Code: 7060
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Polycarbonate male Luer-lock to male Luer-lock connector.
The female protective caps are made of Polyethylene.
Code produit: 893.00

Additional Information:

• Item Code: 7094
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1