Akshar Pharma

I.V. extension tube in flexible, transparent polyurethane tubing with Bionector TKO and mini Roberts clamp.

Octopus with Bionector TKO is a multi-purpose catheter accessory, a single lumen I.V. extension tube with needleless connector, enabling intermittent injections or continuous infusions of fluids or medications and blood sampling.

Octopus with Bionector TKO is a needleless catheter patency device that has been specifically designed to reduce thrombotic catheter occlusions and works by controlling the bi-directional flow of fluid, infusate and catheter tip blood reflux.

Octopus with Bionector TKO has a very easily disinfectable membrane (disinfection must be carried out before and after use) which closes automatically when the infusion line or the syringe is disconnected.

The proximal end of Octopus with Bionector TKO is a female Luer-Lock fitting and will accept any device featuring a male Luer or male Luer-Lock fitting (syringe, infusion set ...).

Octopus with Bionector TKO features a male connector with mobile locking device to connect it to all devices featuring a female Luer-Lock hub (IV catheter…).

Octopus with Bionector TKO has the following advantages:

- Prevents occlusion risks from

. syringe and infusion set disconnection

. syringe plunger rebound

. IV bag running dry

. venous pressure changes (cough…)

- Eliminates the risk of access-associated needle-stick injury

- Reduces the risk of cannula movement in the vein causing mechanical vein irritation

- Provides closed system (avoiding blood reflux) when accessing the catheter

- PUR material (no PVC, DEHP-free), no leaching of plasticizers.

Octopus with Bionector TKO is lipid-resistant.

Priming volume : 0.75 ml.

Maximum infusion/injection pressure is 240 psi (16.5 bar).

Bionector can be disinfected with most of the antiseptic solutions (example: 70% alcohol). Avoid using antiseptic containing both alcohol and oxygenated water.

Specifications

Additional information

Brochure

                Extension tube

Code     Length

cm          Int. Ø

mm        Ext. Ø

mm        Prim. vol.

ml           Flow rate

ml/min

5222.838              27           1.50        2.50        0.75        40

Additional Information:

• Production Capacity: 5000
• Delivery Time: 15DAYS
• Packaging Details: 1*1

Tracheal and bronchial suction catheter.
Open tip. Proximal connector with lateral eye for finger tip control (with integral closing cap).
Fr 4 – 5 – 6 – 7 – 8 – 10: with 2 lateral eyes
Centimetre graduations from 5 to 20 cm. Length 29 cm
Fr 12 – 14 – 16 – 18: no lateral eyes
Centimetre graduations from 5 to 20 cm. Length 42 cm

Quantity box/case: 50/450

• Specifications
• Additional information
• Brochure

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Biovystar / Vystar ramp of stopcocks is an add-on device for intravenous catheters comprising:

a body molded in a lipid-resistant raw material (polycarbonate) and transparent to detect air bubbles to facilitate the priming of the device.

stopcocks in polyoxymethylene (POM), each stopcock having a different colour.

 

Pressure tested to 2 bars during 15 minutes meeting the requirements of the ISO norm 8536-10.

 

The extension tube supplied with Biovystar / Vystar ramps (except code 5828.92: without extension tube) is made of 3 layers. The outer layer is in PVC, the inner layer is in Polyethylene without additives, material presenting a high chemical inertness and the intermediate layer is Ethyl Vinyl Acetate, material linking the inner and the outer layers.

This structure allows to minimize interations with drugs and leaching of plasticizers from the PVC into the administered solutions.

 

Some models of Biovystar / Vystar ramps are supplied with Bionector or Vadsite which are multi-purpose, closed, needle-free connectors allowing blood sampling, intermittent injections or continuous infusions of fluids or drugs.

 

Just the ramp: code 5828.92

Ramp with extension line length 50 cm: code 5828.02

Ramp with extension line length 100 cm: code 5828.12

Ramp with extension line length 150 cm: code 5828.22

Ramp with extension line length 50 cm + ramp holder: code 5828.021

Ramp with extension line length 150 cm + ramp holder: code 5828.221

Ramp with extension line length 50 cm + 3 Bionector + ramp holder: code 5828.023

Ramp with extension line length 150 cm + 3 Bionector + ramp holder: code 5828.223

Ramp with extension tube length 50 cm + 3 Vadsite + ramp holder: code 5828.025

Ramp with extension tube length 100 cm + 3 Vadsite + ramp holder: code 5828.125

Ramp with extension tube length 150 cm + 3 Vadsite + ramp holder: code 5828.225

Ramp with extension tube length 200 cm + 3 Vadsite + ramp holder: code 5828.525

 

Shelf life 5 years except ramps with Bionector: 3 years.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Female Luer-lock to female Luer-lock connector in polycarbonate.                                                      Additional information

Contains Latex: No

Contains DEHP: No

Contains biogical or animal-based product: No

Non-pyrogenic: Yes

Additional Information:

• Delivery Time: 15DAYS
• Packaging Details: 1*1

Siliconized stainless steel needle with double wings for insertion of PICCs (Peripherally Inserted Central Catheters) such as Premicath, Nutriline, Nutriline Twinflo, Lifecath PICC, Lifecath Midline...

4 codes are available:

• 7366.510 for the insertion of 1 Fr catheters
• 7366.710 for the insertion of 2 Fr catheters
• 7366.910 for the insertion of 3 Fr catheters
• 7366.810 for the insertion of 4 Fr catheters

Additional Information:

• Production Capacity: 5000
• Delivery Time: 15 DAYS
• Packaging Details: 1*1

 

Triple-layer extension tube (PVC/EVA/PE) with side outlet for I.V. catheter.This extension tube has a male Luer-lock connector at the distal end and a "Y" connector at the proximal end with female Luer-lock ports.The side outlet is fitted with an injection cap for drug injections with a needle.Diameter of the extension tube : 2.5 x 4.0 mm.

• Specifications
• Additional information

 

 

Additional Information:

• Item Code: 7108
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Octopus is a polyurethane multi-lumen extension tube for I.V. catheters, transparent and with low priming volume.

To identify the different infusion lines, each tube has a clamp of different colour.

 

Octopus 2 (code 841.234) is a 2-lumen extension tube with a clamp (Roberts type) on each lumen. Length: 3cm / 3cm.

This product is recommended for neonatal and paediatric units which need to run two IV infusions simultaneously.Specifications

Additional information

                Extension tube

Code     Int. Ø

mm        Ext. Ø

mm        Length

cm          Priming volume on each lumen

ml           Total priming volume

ml

841.234 1.50 (x2)               2.50 (x2)               3 (x2)     0.25 (x2)               0.40

Additional Information:

• Production Capacity: 5000
• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Additional Information:

• Item Code: 5125
• Production Capacity: 5000
• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

A “sheath” or “introducer” refers to any line (arterial or venous) that contains a port allowing a proceduralist to “introduce” (hence the name) transvenous pacing wires, Swan Ganz catheters, intravascular ultrasound (IVUS), intra-aortic balloon pumps, single lumen infusion catheters (“SLICs”), etc.

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Plain endotracheal tube (without cuff) made of:

• a PVC transparent tube with radiopaque line. The distal end is bevelled to 37°. They have a 17mm intubation depth mark at the distal end. The tube has distance markings every 0.5cm for tubes of size 2.0 to 3.5, markings every centimetre from 9 to 21cm for tubes size 4.0 and 4.5, every centimetre from 13 to 21cm for tube size 5.0 and every centimetre from 15 to 25cm for tubes size 5.5 to 6.5.
• standard 15mm (male) proximal connector.

10 sizes are available: from 2.0mm internal diameter to 6.5mm.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Additional Information:

• Production Capacity: 5000
• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Disposable, sterile laryngoscope blade "Mac Intosh" or "Miller" type, with fibre optic light source. Supplied in a protective cover to reduce the risk of cross-contamination.

N.B. For use only with Safescope laryngoscope handlescodes 692.01/692.02/692.03.


20/180

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

• Provided with flow control clamp to ensure proper use of bladder muscles .
• Self lubricated silicon shaft provides low friction surface to allow trauma free removal.
• Balloon made from low durometer, highly elastic silicon which provides very good tear strength.

  TWO WAY	THREE WAY

  Size in FG	Balloon Capacity	Size in FG	Balloon Capacity
  6	1.5cc	16,18, 20, 22, 24 & 26	30cc
  8	3cc
  10	3 – 5cc
  12 – 24	5 – 10cc

  Note: 15cc & 30cc capacity can also be provided on demand from size 16-24 FR in Two Way Catheter

  SIZES

  FG	6	8	10	12	14	16	18	20	22	24	26
  Colour Code	Light Blue	Black	Grey	White	Green	Orange	Red	Yellow	Violet	Blue	Pink

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Umbilical polyurethane catheter, totally radiopaque with Expert technology, containing the AgION™ antimicrobial agent made of silver ions integrated within the wall of the catheter, used for short term venous catheterisation.
The Expert catheters release silver ions on their internal and external surfaces, so the catheter offers both intraluminal and extraluminal protective action.
Because the silver ions are sensitive to light (photoreactive), the catheter is supplied within a green protective tubing.

Numerical graduations every centimetre from 4 to 25 cm from the distal tip.

The catheter is intended to be used for venous or arterial access.

This catheter is supplied with a 3-way stopcock (Vyclic Color) with identification plugs: blue (venous access) and red (arterial access).

Sizes available:
2.5Fr: Length 30 cm (8270.230)
3.5Fr, 4Fr, 5Fr and 8Fr: Length 40 cm (8270.340, .440, .540 and .840)

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

4-way stopcock for exchange transfusion with injection membrane for intermittent drug injections.                                                                                                                                                                              Contains Latex: No

Contains DEHP: No

Contains biogical or animal-based product: No

Non-pyrogenic: Yes

Additional Information:

• Item Code: 2032
• Production Capacity: 5000
• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Additional Information:

• Delivery Time: IN 7 PCS
• Packaging Details: 1*1

Silicone nasal tube for neonatal ventilation.
Length of tube: 9 cm.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Nelaton urological catheters are used for ongoing cathetering of urinal bladder by introduction through urethra. These are PVC tubes of 85 ShA hardness with T identification - harder or 75 ShA with M identification - softer. The catheters have two side holes, rounded tip and the other end is fitted with colour plug.

Additional Information:

• Item Code: 5628
• Production Capacity: 5000
• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

atheter in radiopaque and transparent PVC, can be used for umbilical venous catheterisation (parenteral nutrition, drug administration, exchange transfusion, blood sampling...) or for umbilical arterial catheterisation (blood gas analysis, blood pressure measurement...)
Distance markings every centimetre from 4 to 25 cm.
Open and smoothed distal tip to reduce vascular trauma.
Available in 6 catheter diameters: 3.5* - 4 - 5 - 6 - 7 and 8 Fr
Length: 37 cm
* to be ordered under code 270.03

Quantity box/case: 15/225

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

aim at ZERO is a new campaign designed by Vygon to help hospitals win the fight against Hospital-Acquired Infections in Neonatal Intensive Care Units. This initiative provides infection reduction solutions at key stages of IV therapy: during the preparation phase, during the insertion of the line and during the infusion. Each product solution has been specially designed for the neonates, based on international recommendations and is supported by both clinical studies and data.

Additional Information:

• Item Code: 6004
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

 

Supplied with drainage bag (code 469.20).
Allows extremely precise reading of initial urine output.
Sites for continuous samplings at the connection to the urethral catheter and at the bottom of the collection chamber.

 

Additional Information:

• Item Code: 4020
• Production Capacity: 5000
• Delivery Time: 7

Code 807.01 and 807.02: 0.22µm air eliminating filter, with PVC extension tube, for filtration of bacteria, endotoxins and particulate matter (latex, glass etc.). Duration of use: up to 96 hours - Supplied with day change labels.

 

N.B.: Filter is not compatible with lipids and blood.

 

 

 

Code 807.102:  1.2µm air eliminating filter for lipidic solutions with PVC extension tube with clamp. Duration of use: up to 24 hours - Supplied with day change labels.

 

N.B.: Filter is not compatible with blood.

 

 

 

Code 807.01: with injection site. Total length 35cm. Dead volume: 4.4ml.

 

Code 807.02: without injection site. Total length 24cm. Dead volume: 3.6ml.

 

Code 807.102: without injection site. Total length 30cm. Dead volume: 3.6ml.

Low protein binding filter.

 

Specifications

Additional information

Extension tube

Code     Length

cm          Prim. vol.

ml           Flow rate

ml/min

807.01   35           4.4          >21

807.02   24           3.6          >19

807.102 24           3.6          >30

Additional Information:

• Production Capacity: 5000
• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Insertion kit for central venous catheter 1 Fr or 2 Fr with the modified Seldinger technique.
The kit contains the following components :

• 1 24G needle with a 15° bevel angle, length 19 mm
• 1 symmetrical nitinol guidewire, 20 cm (flexible tips and ball heads on both side ; marking at 4.5 cm indicating the protrusion of the guide beyond the needle bevel)
• 1 peelable sheath / dilator assembly 2 Fr, length 18 mm
• 1 guidewire insertion aid which ease the insertion of the sheath dilator over the guidewire

The kit allows introducing central venous catheters in premature babies with very small veins that are generally difficult to catheterize.
The nitinol guidewire is kink-resistant and the soft tips avoid venous trauma.
The peelable sheath allows easy dilation of the puncture site and introduction of a 2 Fr catheter or less.
Quantity box: 10

Additional Information:

• Item Code: 1252
• Production Capacity: 5000
• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Introducer Needle with international quality standard. An introducer needle is often used as a means of stabilizing subsequent placement of a small-gauge needle during spinal anesthesia. needle has enhanced sharpened tip with polymer coated cannula which provide better and smoother penetration during Salinger Technique.

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

To overcome the problem of backtracking when two solutions of different densities are used. The higher density solution should always be attached to the lateral port.

25/600

Additional Information:

• Production Capacity: 5000
• Delivery Time: 15 DAYS
• Packaging Details: 1*1

 

Insertion kit for central venous catheter 1 Fr or 2 Fr with the modified Seldinger technique.
The kit contains the following components :

• 1 24G needle with a 15° bevel angle, length 19 mm
• 1 symmetrical nitinol guidewire, 20 cm (flexible tips and ball heads on both side ; marking at 4.5 cm indicating the protrusion of the guide beyond the needle bevel)
• 1 peelable sheath / dilator assembly 2 Fr, length 18 mm
• 1 guidewire insertion aid which ease the insertion of the sheath dilator over the guidewire

The kit allows introducing central venous catheters in premature babies with very small veins that are generally difficult to catheterize.
The nitinol guidewire is kink-resistant and the soft tips avoid venous trauma.
The peelable sheath allows easy dilation of the puncture site and introduction of a 2 Fr catheter or less.
Quantity box: 10

• Specifications
• Additional information
• Brochure
• Video

Additional Information:

• Item Code: 7105
• Production Capacity: 5000
• Delivery Time: 7-8 days
• Packaging Details: 1*1

Needleless vial access cap for small vial cap 14 mm (codes 7219.01/010) or large vial cap 20 mm (codes 7219.02/020) with plastic spike.

After perforation of the cap of the vial, Qimo Female will avoid the contamination of the drug and will allow multiple vial accesses for drug sampling with a syringe after disinfection of the membrane of Qimo Female.

Qimo Female is a multi-purpose, closed, needle-free, I.V. connection device. See the corresponding technical file code 7210.02.

Codes 7219.01/02: QimoCap – 1 unit in a supple blister

Codes 7219.010/020: Set of 25 QimoCap

– Code 7219.010: 25 units in a supple blister / 100 units in a box / 1 800 units in a case

– Code 7219.020: 25 units in a supple blister / 100 units  in a box / 1 200 units  in a case

 

 

 

 

Additional Information:

• Item Code: 7022
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Code 802.01: connector for finger-tip control of suction for suction catheters size 4Fr, 5Fr, 6Fr, 7Fr and 8Fr * WITH SMALL FUNNEL CONNECTOR.
Code 802.00: connector for finger-tip control of suction for suction catheters size 10Fr * to 21Fr WITH LARGE FUNNEL CONNECTOR.

*Note: Code 530.10 and 533.10 (10Fr suction catheters) have a SMALL FUNNEL. Consequently with these 2 suction catheters connector code 802.01 must be used.
 

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Catheter in radiopaque and transparent PUR, can be used for venous or arterial access.
Supplied with a small 2 way stopcock and identification plugs (red for arterial use, blue for venous use).
Actual distance from the distal tip is printed numerically from 4 to 25 cm.

• Polyurethane has good haemocompatibility 
• No plasticiser release 

	Catheter
Code		Int. Ø mm	Ext. Ø mm	Ø Fr	Length cm	Flow rate ml/min	Prim. vol. ml
	1270.02	0.5	0.8	2.5	30	3	0.12
	1270.03	0.8	1.2	3.5	40	10	0.27
	1270.04	0.8	1.5	4	40	10	0.29
	1270.05	1.0	1.7	5	40	23	0.40
	1270.08	1.5	2.5	8	40	100	0.81

Fr 2.5* (length 30 cm) - 3.5* (length 40 cm) - Quantity box/case: 8/120
* To be ordered under code number 1270.02 -1270.03.
Fr 4 - 5 - 8 -Length 40 cm - Quantity box/case: 20/180

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Reusable laryngoscope handle with Xenon bulb, supplied with a tool for placing / removing the Xenon bulb.
The handle is completely waterproof.
It may be cleaned using hospital disinfectants or immersed in a disinfectant bath.
Before sterilizing the handle in an autoclave, remove the batteries and the bulb.
N.B. Safescope laryngoscope handles should only be used with Vygon disposable blades (codes 691 and 693).

Code 692.01: standard handle to be used with LR 14 (x2) batteries (Batteries not supplied).
Code 692.02: short handle to be used with LR 6 (x2) batteries (Batteries not supplied): obese patients, short neck, pregnant women.
Code 692.03: thin handle to be used with LR (x2) batteries (Batteries not supplied): paediatric use.

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

The nasopharyngeal suction catheter is used for oral/nasal/pharyngeal suction to eliminate all liquids (secretions, blood, etc.) clogging this space.

This suction catheter is composed of: 

• PVC,
• 15cm long.,
• soft connector in small funnel shape,
• open smooth distal tip, 
• with a lateral eye (only for codes: 80522.xxB). 

These suction catheters are available in 3 external diameters: 6Fr (codes 522.06 / 80522.06B), 8Fr (codes 522.08 / 80522.08B) and 10Fr (codes 522.10 / 80522.10B).

• Specifications
• Additional information

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

The Haumont kit allows to place safely and without pain a silicone catheter for long-term access in the umbilical vein with a specific introducer.
With the Haumont kit, the user can choose to place the catheter either in a peripheral vein (basilic, cephalic, saphena...) using the winged needle introducer or in the umbilical vein.
If the catheter is inserted in the umbilical vein, it must be placed using one of the 3 introducers (Ø 6Fr, in PVC) supplied in the kit. These introducers have 3 different lengths (8 cm, 9 cm and 11 cm) to suit the size of the baby and the distance of the cord section.
Graduations every centimetre up to 25cm. Removable Easy-lock connector with integrated PUR extension tube (10cm long).

The Haumont kit is presented in a rigid blister pack containing:

• 1 epicutaneo-cava silicone catheter 2Fr, 24G, 30 cm long
• 3 introducers for inserting the catheter in the umbilical vein Ø 6Fr, length 8, 9 and 11cm
• 1 winged stainless steel needle (Ø 1.0mm - 19G - 27mm long) if the user prefers to insert the catheter in a peripheral vein instead of the umbilical vein
• 1 measuring tape

Quantity box/case: 10/50 

Additional Information:

• Delivery Time: 15 DAYS
• Packaging Details: 1*1

Nutrifit feeding tubes in PVC for enteral nutrition of children and adults with radiopaque line and closed distal tip with 2 lateral eyes for 4Fr to 12Fr and 4 lateral eyes for 14Fr to 18Fr..

Additional Information:

• Item Code: 6009
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Nutrifit polyurethane gastro-duodenal feeding tubes (with ENFit connection) with closed distal tip and 2 lateral eyes for 4Fr to 12Fr and 4 lateral eyes for 14Fr to 21Fr – Length 40 cm (code 1364.047 / 057 / 067 / 087), 50 cm (code 1361.047 / 057/ 067 / 087 / 107), 75 cm (code 1363.047 / 057 / 067 / 087 / 107 / 127), 90 cm (code 1366.087 / 107 / 127), and 125 cm (code 1362.047 / 057 / 067 / 087 / 107 / 127 / 147 / 167 / 187).

·          

·         Markings every centimeter from 5 to 35 cm for feeding tubes measuring 40, 50 and 75 cm; markings every centimeter from 5 to 70 cm for feeding tubes measuring 90 cm and 125.

·         Purple-coloured safety connector necessitating the use of dedicated Nutrifit accessories.

·         Radiopacity of the feeding tubes: radiopaque line from 4Fr to 6Fr, and ¾ radiopaque tubing from 8Fr.

·         Obturator with colour-coded strip.

The Nutrifit feeding tubes are fitted with an ENFit connection compliant with the ISO standard 80369-3.
Consequently, accidental misconnections between devices equipped with an ENFit connection  intended for enteral nutrition and devices intended for other indications (venous access, spinal, epidural, vesical, respiratory…) are avoided and the right administration route is respected.

Maximum duration of use: 29 days.

Additional Information:

• Item Code: 6011
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Male Luer-lock stopper (latex free)

Additional Information:

• Item Code: 7106
• Production Capacity: 5000
• Delivery Time: 15DAYS
• Packaging Details: 1*1

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

Additional Information:

• Item Code: 8956
• Production Capacity: 5000
• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1

The triple lumen umbilical catheter is used for short term catheterization through the umbilical vein when a multiple access is needed.
It is used for TPN administration, & injection of drugs,  particularly administration of drugs with incompatible features or when one drug needs to be infused continually at a slow rate (ex. inotropes). 
This device allows to reduce the number of peripheral routes needed and so the number of insertions, optimising the infant's comfort.
The secondary functions of the catheter are blood sampling, transfusion and measurement of central venous pressure.
The catheter is made of radiopaque polyurethane (PUR) with markings every centimer. It is equipped with a soft green distal tip to reduce the trauma to the vessel. It has three extension lines with three color-coded hubs to better identify each lumen.

Additional Information:

• Delivery Time: IN 7 DAYS
• Packaging Details: 1*1