Akshar Pharma

Askina® Soft I.V. is a sterile and hypoallergenic I.V. cannula fixation plaster, with an integrated non-adherent absorptive pad.

Additional Information:

• Item Code: 359
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Parenchyma Set is a special suture set consisting of an absorbable Safil® violet tape of polyglycolic acid, attached to a round bodied blunt needle. It presents wide structure and soft consistence to avoid incision and devitalisation of the parenchymal organ.

Additional Information:

• Item Code: 358
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Columbus® is a modern total knee endoprosthesis system. The different options cover all bicondylar indications and intraoperative situations: conservation or sacrifice of the posterior cruciate ligament, fixed or rotating platform, use with or without cement. Stability and kinematics are optimal through the design and the use of the OrthPilot® navigation system.

Additional Information:

• Item Code: 354
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Perican epidural needle

• Tuohy bevel
• Diameter 1.30 x 80 mm, 18 G or
• Diameter 1.70 x 80 mm, 16 G

Perifix epidural catheter

• Catheter opening acc. to table
• Length 1000 mm
• Threading assist guide

Perifix catheter connector

• "Snap" catheter connector

LOR syringe

• Contained in the following sets:
  Perifix® 301, REF 4513010
  Perifix® 302, REF 4513029

Additional Information:

• Item Code: 607
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Set consists of:

• Valve needle (V) 
• Kink-proof guide wire with flexible J-tip
• Antimicrobially modified triple-lumen catheter: Soft catheter tip / X-ray detectable, opaque / Three lumen:  distal = 16 G; middle = 18 G; proximal = 18 G / Length markings / Color-coded Luer-Lock hubs / Fixation wings at the channel junction for securing the catheter
• Movable fixation with fixation wings for catheter fixation at the puncture site
• Cable for ECG monitoring
• Scalpel
• Dilator
• Safsite® connector
• Omnifix® syringe

Additional Information:

• Item Code: 609
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Set consists of:

• Valve needle = V
• Kink-proof guide wire with flexible J-tip
• Omnifix® lock syringe, 5 ml
• Cutfix® scalpel
• Dilator
• Double-lumen catheter
  • Made of PUR
  • Soft catheter tip
  • X-ray detectable, opaque
  • Two lumens:
    distal = 16 G; proximal = 16 G
  • With Safsite® valves
  • Length markings for accurate catheter placement
  • Color-coded Luer-Lock fittings
  • Fixation wing at the channel junction for securing of the catheter
  • Protruding, adjustable fixation wing for stitch fixation at the puncture site (only 20 cm and 30 cm length)
• ECG connection cable

Additional Information:

• Item Code: 610
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Vitelene® is a highly crosslinked polyethylene blended with vitamin E. Vitamin E provides long-term oxidation protection by binding free radicals through the release of H atoms. Polyethylene powder GUR 1020 is mixed with vitamin E (0.1 % - α-tocopherol) and pressed into sheets. Afterwards a total dose of 80 kGy electron beam radiation is applied to crosslink the blank product. Vitelene® inserts are manufactured using CNC technology and sterilized with ethylene oxide. Vitelene® needs no thermal treatment and has, therefore, balanced mechanical properties. It is characterized by wear and oxidation resistance. The articulation material Vitelene® is offered with the AESCULAP® acetabular cup systems Plasmafit®, Plasmafit® Dual Mobility as well as Plasmafit® Revision.

Additional Information:

• Item Code: 606
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Pencil point needle for spinal anesthesia and diagnostic puncture

• 22 G - 27 G
• Sturdy tip design
• Tip design allows for minimal intrathecal penetration depth and avoidance of incomplete blocks
• Transparent needle hub
• Color-coded stylet hub
• Pediatric sizes available

Additional Information:

• Item Code: 608
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

• for cleansing and moistening of acute and chronic wounds, 1st and 2nd degree burns
• ready-to-use colourless solution for irrigation and wound bed preparation to remove coatings before further treatment is carried out
• based on betaine surfactant and polyhexanide (polyaminopropyl biguanide): high tissue tolerance and biocompatibility of the product
• sterile solution
• can be used on colonised, critically colonised, and infected wounds
• absorbs wound odours
• can be used up to 8 weeks after opening

Additional Information:

• Item Code: 955
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Silver Graft protheses are warp-knitted, double-velour vascular prostheses made of polyethylene terephthalate (polyester) for reconstructive procedures on the aorta and arteries in the peripheral area. They are impregnated with absorbable modified bovine gelatin for temporary sealing. The outer surfaces of the prostheses are coated by a metallic silver layer to inhibit microbial adhesion. Temporary sealing and inhibition of microbial adhesion are confirmed by product tests as well as preclinical in vivo and in vitro tests. Silver Graft prostheses are available in different lengths and diameters.

Additional Information:

• Item Code: 964
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Minimally invasive and bone sparing
Minimally invasive – YES – but above all safe. Minimally invasive instruments in conjunction with the OrthoPilot® provide for a safe, minimally invasive surgical technique. The navigation procedure is integrated in the operation in a user-friendly manner. The exact implant alignment is documented reproducibly during ongoing surgery with the OrthoPilot®. The univation® system with its bone sparing design provides high primary stability. Only minimal bone resections of the femur and tibia are needed for ensuring secure anchorage. Form and position of the primary fixation elements on the metal components as well as the sturdy yet slim design of the implants make this possible. Minimum bone resection also allows for easier revision surgeries.

Additional Information:

• Item Code: 965
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Optilene® Mesh LP is a super-light polypropylene mesh which offers an excellent biocompatibility. The foreign body reaction is reduc e considerably. Optilene® Mesh LP is the alternative super-lightmesh for all open hernia repair procedures. It perfectly conforms to anatomical structures. Due to its excellent flexibility Optilene® Mesh LP adapts to the movements of the patient resulting from bod y motion. Optilene® Mesh LP offers extreme dimensional stability as well as full transparency so that the tissue underneath is visible during surgery.

Additional Information:

• Item Code: 972
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Optilene® Mesh is an universal-light mesh, which combines a lightweight concept with an excellent handling. It is a soft, large pore and elastic mesh – at the same time it is a strong mesh with excellent spread characteristics. The blue guidelines allow for a well directed placement. The mesh can be used for inguinal and incisional hernia repair. It provides optimal handling for open and laparoscopic application. Optilene® Mesh is suitable for all hernia repairs.

Additional Information:

• Item Code: 974
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Optilene® Mesh Elastic is a lightweight and large pore polypropylene mesh. Due to the multidirectional elasticity the mesh is able t o adapt to all movements taking place in the abdominal wall. The new honeycomb like structure with the large pores enables for ideal healing and formation of an elastic scar. The mesh is ideal for incisional hernia repair and can also be used to repair inguinal he rnias. Optilene® Mesh Elastic helps for maintaining an excellent abdominal wall physiology and results in highest patient convenience.

Additional Information:

• Item Code: 973
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Introcan® - conventional IV catheter

• IV catheter material available in FEP or Polyurethane
• Ergonomic product design for one-handed insertion
• Sharp backcut bevel for minimal puncture trauma
• Transparent segments provide confirmation of successful catheter placement when withdrawing the needle
• Latex-free, PVC-free
• Acc. ISO-Standard 10.555-1/5

Additional Information:

• Item Code: 985
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

For continuous peripheral nerve blocks (cPNB) performed under ultrasound and nerve stimulation (dual guidance).

Catheter-through-needle system

• Catheter placement system with threading assist guide
• Side port valve technique for simultaneous injection and aspiration  

Contiplex® S Ultra 360® cannula

• Safety code for identification of the needle and needle tip position
• 360° X-pattern results in better ultrasound visualization and tip identification compared to previous designs
• 20° facet bevel, together with a high quality coating enables smooth gliding through tissue  

Additional Information:

• Item Code: 981
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

B. Braun Vascular Systems offers a Drug Coated Balloon for PTCA, based on a polymer-free carrier matrix. This most innovative product is the result of our sustained research for new options and improvements in the field of coronary angioplasty. Clinically proven, it offers completely new procedural options to treat vascular stenoses since the drug elution does not require a stent platform.

Solution Oriented Polymer-Free Angioplasty
SeQuent® Please is part of our complementary product portfolio for a polymer-free angioplasty. The concept offers last generation device solutions for an indication driven treatment of complex vascular stenosis. The absence of a polymer as a drug carrier facilitates fast endothelialization and avoids inflammatory foreign body reactions.

Additional Information:

• Item Code: 357
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Silkam® is a suture material made from braided silk fibrils (polypeptide chains). Silkam® is available either undyed (white) or dyed black with hematein (Logwood black – 21 CFR73.1410). Silkam® is coated with wax.

Silkam® fulfils all the requirements of the European Pharmacopoeia and United States Pharm., current edition, for sterile, non-absorbable sutures.

Additional Information:

• Item Code: 356
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

SeQuent® II offers an improved sequential tip design (USP) and numerous other features for enhanced crossability, flexibility and pressure resistance. Especially the balloon sizes Ø 1.25 and 1.5 mm with their practically non compliant, high pressure balloon performance will offer the physicians more treatment options in challenging CTO patients

Additional Information:

• Item Code: 353
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

• Stiff catheter shaft for easy catheter insertion
• Made of Polyamide
• Length 1000 mm
• Clear blue markings completely embedded in the catheter material
• Threading assist guide

Additional Information:

• Item Code: 352
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Quincke needle for spinal anesthesia and diagnostic lumbar puncture

• 22 G - 29 G
• Sharp bevel
• Transparent needle hub
• Color-coded stylet hub

Additional Information:

• Item Code: 351
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Set consists of:

• Valve needle (V)
• Kink-proof guide wire with flexible J-tip
• Antimicrobially modified four-lumen catheter: Soft catheter tip / X-ray detectable, opaque / Four lumen: distal = 14 G; middle 1 = 18 G; middle 2 = 18 G; proximal = 16 G / Length markings / Color-coded Luer-Lock hubs / Fixation wings at the channel junction for securing the catheter
• Movable fixation with fixation wings for catheter fixation at the puncture site
• Cable for ECG monitoring
• Scalpel
• Dilator
• Safsite® connector
• Omnifix® syringe

Additional Information:

• Item Code: 601
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The ideal material should not only have a high tear resistance but also adequate elasticity to absorb and intercept the tension from the fascia dynamics (10). Current literature supports the use of slow absorbable monofilament sutures to close the abdominal wall in elective cases (1) and also of the trocar sites (7). After having found unexpectedly high rates of incisional hernia in all groups (interrupted VICRYL® , continuous PDS® , continuous MonoPlus® ), the INSECT study concluded that new concepts are still needed for abdominal wall closure (2)

Additional Information:

• Item Code: 605
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Resistant to the effects of pharmaceuticals

• Resistant against pharmaceuticals with previously unattained degree of transparency
• Resistance against stress cracking resulting from exposure to infusion solutions, drugs and alcohol-based disinfectants
• Protection against the danger of unnoticed cracks, air infusion and leakage
• Fast connection with rotating adapter
• Reliable, secure system connection with rotation of the connected stopcock unit on its own axis
• Light snap at every 45° turn of the valve

Additional Information:

• Item Code: 952
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

• Now with exact depth markings to identify the puncture depth
• Crystal clear coating for good gliding through all tissue layers
• Widely used 30° facet bevel
• The ergonomic hub facilitates enhanced tactile feedback
• Compatible with all B.Braun nerve stimulators

Additional Information:

• Item Code: 953
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

• Improved knot pull tensile strength (KPTS) compared to the European Pharmacopoeia (EP).
• Better flexibility performance and similar knot safety compared to the market reference.
• Greater smooth surface than market reference in USP sizes 0 and 2/0, allowing an easier and faster knot running down.
• Needle penetration performance better for the most used needles of Novosyn® compared to the market reference.
• Less inflammatory reaction after suture implantation compared to the market reference based on in-vivo animal studies.

Additional Information:

• Item Code: 954
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Xperius® is a new Ultrasound system jointly developed by B. Braun and Philips which has been specifically designed to support the current and future needs in regional anesthesia and vascular access at the point of care.

Xperius® is typically used to perform Ultrasound guided regional anesthesia such as Peripheral Nerve Block and neuraxial applications as well as Ultrasound-assisted vascular access e.g. CVC, PICC, IVC placements and arterial accesses. Moreover it can be applied for abdominal examinations, lung scans and other diagnostic purposes.

Additional Information:

• Item Code: 961
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Dafilon® is a non-absorbable synthetic monofilament suture made of polyamide polymers 6/6.6 (dyed blue or undyed) or polyamide 6.6 (dyed black).

Additional Information:

• Item Code: 962
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Omyra® Mesh is the first bacterial resistant antiadhesive mesh. Omyra® Mesh brings a new concept for hernia repair. It is made of light-weight condensed Polytetrafluoroethylene (cPTFE) and a Star-Macroporous structure improves the adhesion prevention features of the traditional expanded PTFE and enhances the tissue integration achieved with Polypropylene meshes. The CondensTech, transparent monolayer Omyra® Mesh provides the best handling, specially in laparoscopic procedures.

Additional Information:

• Item Code: 971
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Pencan® spinal needle or Spinocan® spinal needle

• Sleeve to center the spinal needle inside the epidural needle
• Tip of the needle exits straight through the back eye

Pencan® epidural needle

• With Tuohy bevel
• Diameter 1.30 x 88 mm, G 18 x 3 1/2"
• Additional back eye in the Tuohy curve

Additional Information:

• Item Code: 975
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Needle with Tuohy type bevel for continuous epidural anesthesia

• 1 cm graduation
• Small wings
• Transparent needle hub
• Color-coded stylet hub

Additional information

Perican® Needles are also available in customized kits. Kits can contain syringes, needles, drapes, and hygiene material, depending on individual needs. All components are placed in a tray wrapped in a field sheet.

Additional Information:

• Item Code: 984
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

There is a system for successful hip joint replacement: The Bicontact® hip a prosthesis design, unchanged since 1987. Special implantation instruments, the Bicontact® osteoprofilers, ensure that the cancellous bone in the proximal femur is preserved to a large extent. The prosthesis stem is well-anchored, proximally, through bone compression. On the distal side, the cortical bone is preserved as there is no need for reaming. The same surgical technique allows to decide intraoperatively whether cementless or cemented Bicontact® stem is the optimal treatment selection. The Bicontact® system is completed by a range of modular heads and acetabular sockets and implant components for revision.

Additional Information:

• Item Code: 603
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

The Metha Short Hip Stem prosthesis represents a new generation of implants for hip endoprosthesis. It combines two advantages: minimal stem size and a circumferential coating. The implant design enables minimally invasive procedures.

The design continues on the positive experience with non-cemented stems fixated by metaphyseal anchoring. The prosthesis concept allows implantation via the base of the femoral neck, with conservative treatment of the bone in the femoral neck and in the greater trochanter region, preserving the bone, soft tissue and muscle.

Additional Information:

• Item Code: 604
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

With OrthoPilot®, physicians have a tool for the precise execution of surgical interventions. The essential criteria in the development of the OrthoPilot® was its perfect integration within the surgical workflow by avoiding extension of operating time. Parallel, minimizing the strain on the patient caused by the navigation procedures was a central issue. OrthoPilot® was developed to achieve the main surgical goal of perfect implant alignment without having to perform preoperational examinations or take radiation-intensive and expensive CT or MRI scans.

Additional Information:

• Item Code: 951
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

VascuGraft PTFE vascular prostheses areconstructed of expanded poly-tetra-flour-ethylene (PTFE) material to form a microporous vascular implant with an advanced structure: V-shaped running through pores, pore size 60µm outside and 20µm inside. VascuGraft PTFE features a uniquely flexible, kink-resistant design that is sufficient porous to encourage cellular in-growth, yet offers maximum protection against blood loss, suture pullout, tearing or delamination. VascuGraft PTFE's technically advanced architecture also provides maximum protection againstkinking or twisting of the prosthesis following implantation. Helix supported grafts include a removable, continuous spiral PTFE monofilament for additional compression resistance. Tapered, short taper and stepped taper configurations are available for use in special hemodynamic conditions.

Additional Information:

• Item Code: 983
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Perifix® ONE Paed Filter Sets with LOR syringe

Perifix® ONE Paed epidural sets in suitable sizes for newborns, infants and school children. Catheters with practise-related distance markings for pediatric use, for safer catheter insertion and position control.

Perican® Epidural Needle

• Tuohy bevel
• 0.5 cm length marking
• 1.3 x 50 mm,18 G (for 20G catheteres) or
• 0.9 x 50 mm, 20 G (for 24G catheters)
• Transparent hub with wings
• Stylet, color coded

Additional Information:

• Item Code: 982
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Early results of minimally invasive total knee arthroplasty shows that the procedure is less painful and recovery time is shorter. However, the challenge is to maintain the required standard precision with limited exposure. Therefore it is necessary to ensure that the requirement accuracy is maintained despite limited surgical exposure.

Aesculap offers computer-based technologies that achieve better functional results, especially with minimally invasive approaches in terms of total knee arthroplasty.

Additional Information:

• Item Code: 360
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1

Monosyn® is a sterile synthetic absorbable monofilament surgical suture produced from a copolymer of 72% glycolide, 14% ε-caprolactone, 14% trimethylenecarbonate. Monosyn® is dyed violet with the dyestuff D&C Violet No 2 (colour index number 60725), but is also available undyed (beige). Monosyn® fulfils all the requirements of the European Pharmacopoeia and of the United States Pharmacopoeia for sterile, synthetic absorbable monofilament sutures, except for minor variations in suture diameter.

Additional Information:

• Item Code: 602
• Production Capacity: 5000
• Delivery Time: 7-10 days
• Packaging Details: 1*1